12 OPTIONS
12 Options
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or damage may occur.
The options in this section refer to
12.1 Installing Telescoping I.V. Rod/O2 Holders
Installing
For this procedure, refer to FIGURE 1 on page 66.
WARNING
The telescoping I.V. rod/O2 holder MUST be checked weekly to ensure it is tightly secured to the wheelchair frame. If there is any looseness whatsoever, tighten the attachment hardware securely before using.
Make sure the telescoping I.V. rod is tightly locked before placing I.V. medication on the rod.
The telescoping I.V. rod is designed to support I.V. medication only. DO NOT use it to support objects other than I.V. medication. The telescoping I.V. rod/O2 holders clean easily with any household glass type cleaner.
1.Slide telescoping I.V. rod/O2 holder over the step tube of the wheelchair.
Mounting bracket of telescoping I.V. rod/O2 holder should be positioned between the two axle mounting positions on wheelchair frame.
2.Secure telescoping I.V. rod/O2 holder to the wheelchair frame with hex screw, spacer and locknut.
3.Telescoping I.V. Rod Holder Only - Secure the top of the telescoping I.V. rod holder to the wheelchair frame with a tie wrap.
Part No 1100868 | 65 | Invacare® Jymni™ Pediatric Series Wheelchair |