Invacare 9000 STANDARD WEIGHT Using Patient Operated Wheel Locks, Push-To-Lock, Pull-To-Lock

Page 57

10.2 Using Patient Operated Wheel Locks

WARNING

After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or damage may occur.

WARNING

DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are not brakes.

Position wheelchair on a flat, level surface to perform this procedure.

1.Ensure the wheelchair is not moving before engaging the wheel locks.

2.Depending on the model of wheel lock installed on the wheelchair, perform one of the following:

• Push-to-Lock - To engage, push the wheel lock handle forward.

• Pull-to-Lock - To engage, pull the wheel lock handle backward.

3.Disengage the wheel locks by reversing STEP 2.

10 ANTI-TIPPERS/WHEEL LOCKS

Push wheel lock handle forward away from the tire to engage wheel lock

Unlocked Position

Locked Position

Wheel Lock

	Push-To-Lock	Pull wheel lock handle toward
		the tire to disengage wheel lock
	Pull wheel lock handle toward the tire to engage wheel lock
		Locked Position
		Wheel Lock
	Unlocked Position	Push wheel lock handle away from
	Pull-To-Lock	Push wheel lock handle away from
	Pull-To-Lock	the tire to disengage wheel lock

FIGURE 3 Using Patient Operated Wheel Locks

Part No 1100868

57

Invacare® Jymni™ Pediatric Series Wheelchair

Image 57

Contents Page Invacare Jymni Pediatric Series Wheelchair Contents Arms ANTI-TIPPERS/WHEEL Locks General SymbolsLimited Warranty Label Locations OverviewCrossmember Lower Frame TubeOn all adjustable Anti-tippers Models with Quick-Release Axles OnlyJymni Recliner Models Only Typical Product Parameters Permanent 19 or 23 inches35½ to 39¼ inches AluminumFront Caster Component IdentificationGeneral Guidelines SafetyOperating Information Anti-tippers General Warnings Hand Grips Repair and Service Information Information for Healthcare Professionals/Assistants LiftingRamps, Slopes, Inclines and Obstacles Weight Training Weight LimitationSeat Positioning Strap Tire PressureWheel Locks Wheelchair Tie Down RestraintsWheelchair User Safety/Handling of Wheelchairs Stability and BalanceRecliner Models Only Refer to the procedure that is checked to maintain Reaching, Leaning and Bending Forward or Sideways ForwardBackwards Tipping Coping With Everyday ObstaclesMethod 1 Wheelchair With Step Tubes Step TubeMethod 2 Wheelchair Without Step Tubes StairwaysMoving Down Stairs Moving Up StairsTransferring To and From Other Seats EscalatorsUnfolding Sling Seat Unfolding and Folding WheelchairUnfolding/Folding Solid Seat Model Wheelchairs Folding Sling SeatSafety Inspection/Troubleshooting Safety Inspection ChecklistInspect/Adjust Initially Inspect/Adjust Monthly Inspect/Adjust WeeklyInspect/Adjust Periodically TroubleshootingSolutions Casters SqueaksMaintenance Maintenance Safety Precautions Suggested Maintenance ProceduresDamage may result Replacing/Repairing Rear Wheel Tire/Tube Transporting the Invacare Jymni Replacing/Repairing Caster Tire/TubeInstalling/Removing the Swingaway Footrest Assembly InstallingFront Riggings RemovingUpper Footrest Support Bolt Locknut Lower Footrest Assembly Swingaway Footrest Height AdjustmentJ932A-14 J932A and J933AJA932A Elevating Legrest J934A-14 onlyJA932A-14 J934A-14Installing/Removing Elevating Legrest Assembly StepSteps 2 Adjusting Calfpad Lowering Legrest AssemblyAdjusting Height Detail aAdjusting Armrest Height Adjust armrest to one of five positionsArms Armrest Release Lever Rear Arm Socket Using Swing-Back ArmsRemoving Armrests Removing or Replacing ArmrestReplacing Armrests PostMounting Screws Clothing Guard Armrest Pad Assembly Guard to the armrest assemblyReplacing Clothing Guards Fixed Height Arms Only Converting Between Space Saver and Conventional ArmsConventional Arm Position Space Saver Arm PositionReplacing Seat Upholstery Seat and BackReplacing Back Upholstery Washer Mounting Screws Back Upholstery Back CaneBack Cane Wheelchair Frame Locknuts Mounting Screws Cane to the wheelchair frame are not shown for clarity Adjusting Back HeightAdjusting Seat Width and Depth Removing/Installing Rear Wheels Rear WheelsPermanent Axles Detail a Detent balls and detent pin Quick-Release AxlesInside Wheelchair Outside WheelchairWheelchair Frame Locknut Locking Pins Adjusting the Quick-Release AxleReplacing Rear Wheel Handrim Replacing Rear Wheel HandrimFront Casters Installing/Replacing Front Casters and ForksAdjusting Front Caster Mounting Replacing/Repairing Front Caster Tire/TubeAnti-tippers/Wheel Locks Installing/Adjusting Anti-tippers1101959 1058752 Installing Anti-TippersAnti-Tipper Release Buttons Rear Frame Tubing Anti-Tipper LengthInches Adjusting Anti-TippersPush-To-Lock Using Patient Operated Wheel LocksPull-To-Lock Pull wheel lock handle toward the tire to engage wheel lockAdjusting Patient-Operated Wheel Locks Adjusting Patient-Operated Wheel LocksWheel Lock Wheel Lock Shoe Rear Wheel Inch 3/16-inch pneumatic tires Wheel Lock Shoe TireOperating Recliner ReclinerReclined Position Upright PositionReplacing Headrest Pillow Installing/Removing Headrest ExtensionReplacing Headrest/Back Upholstery Headrest Upholstery Back UpholsteryKnob Back Upholstery Storing/Replacing Spreader Bar Storing Spreader Bar Adjusting Headrest/Back Upholstery TensionRemoving From Stored Position Headrest Upholstery Spreader Bar BackAdjusting the Seat Width and Depth Placing In Stored PositionReplacing Spreader Bar Options Installing Telescoping I.V. Rod/O2 HoldersDetail a I.V. Rod/O Detail B O 2 holder Holder CleaningTie Wrap Step Tube LocknutWheel Positioner Installing the 1-inch Forward Rear Wheel PositionerHeight Adjustment Installing/Adjusting Stroller Handles RemovingRepeat Steps 1-3 for the opposite stroller handle Repeat Steps 1 3 for the opposite stroller handleInstalling/Removing the Solid Seat Insert Installing Installing/Removing the Solid Back InsertInstalling the Wheel Lock Extension Handle Invacare Jymni Pediatric Series Wheelchair Invacare Jymni Pediatric Series Wheelchair One Invacare Way Canada