Invacare 9000 STANDARD WEIGHT user manual Adjusting the Quick-Release Axle

Page 50

8REAR WHEELS

8.2Adjusting the Quick-Release Axle

￿ WARNING

Never use quick-release axles on recliner wheelchairs.

1.Remove rear wheel and quick-release axle from the wheelchair. Refer to Removing/Installing Rear Wheels on page 48.

2.Depress detent pin in the quick-release axle and slide axle through the rear wheel hub.

3.Release detent pin ensuring that the detent balls are fully released.

4.Increase or decrease end play by adjusting the locknut on the end of the quick-release axle.

￿ WARNING

Make sure the detent pin and detent balls of the quick-release axle are fully released before operating the wheelchair.

Keep detent balls clean.

5.Reinstall rear wheel onto the wheelchair. Refer to Removing/Installing Rear Wheels on page 48.

Wheelchair Frame

Locknut

 

Locking Pins

Detent

 

 

Pin

Axle Spacer

Rear Wheel

 

 

Hub

Quick-Release Axle

 

Page 49 Page 51
Image 50
Page 49 Page 51
Contents Page Invacare Jymni Pediatric Series Wheelchair Contents Arms ANTI-TIPPERS/WHEEL Locks Symbols GeneralLimited Warranty Crossmember OverviewLabel Locations Lower Frame TubeJymni Recliner Models Only On all adjustable Anti-tippersModels with Quick-Release Axles Only Typical Product Parameters 35½ to 39¼ inches 19 or 23 inchesPermanent AluminumComponent Identification Front CasterSafety General GuidelinesOperating Information Anti-tippers General Warnings Hand Grips Ramps, Slopes, Inclines and Obstacles Repair and Service InformationInformation for Healthcare Professionals/Assistants Lifting Seat Positioning Strap Weight LimitationWeight Training Tire PressureWheelchair User Wheel LocksWheelchair Tie Down Restraints Recliner Models Only Safety/Handling of WheelchairsStability and Balance Refer to the procedure that is checked to maintain Backwards Reaching, Leaning and Bending Forward or SidewaysForward Method 1 Wheelchair With Step Tubes Coping With Everyday ObstaclesTipping Step TubeStairways Method 2 Wheelchair Without Step TubesMoving Up Stairs Moving Down StairsEscalators Transferring To and From Other SeatsUnfolding and Folding Wheelchair Unfolding Sling SeatFolding Sling Seat Unfolding/Folding Solid Seat Model WheelchairsInspect/Adjust Initially Safety Inspection/TroubleshootingSafety Inspection Checklist Inspect/Adjust Weekly Inspect/Adjust MonthlySolutions TroubleshootingInspect/Adjust Periodically Casters SqueaksDamage may result Maintenance Maintenance Safety PrecautionsSuggested Maintenance Procedures Replacing/Repairing Rear Wheel Tire/Tube Replacing/Repairing Caster Tire/Tube Transporting the Invacare JymniFront Riggings InstallingInstalling/Removing the Swingaway Footrest Assembly RemovingJ932A-14 Swingaway Footrest Height AdjustmentUpper Footrest Support Bolt Locknut Lower Footrest Assembly J932A and J933AJA932A-14 Elevating Legrest J934A-14 onlyJA932A J934A-14Steps 2 Installing/Removing Elevating Legrest AssemblyStep Adjusting Height Lowering Legrest AssemblyAdjusting Calfpad Detail aArms Adjusting Armrest HeightAdjust armrest to one of five positions Using Swing-Back Arms Armrest Release Lever Rear Arm SocketReplacing Armrests Removing or Replacing ArmrestRemoving Armrests PostReplacing Clothing Guards Fixed Height Arms Only Guard to the armrest assemblyMounting Screws Clothing Guard Armrest Pad Assembly Converting Between Space Saver and Conventional ArmsSpace Saver Arm Position Conventional Arm PositionSeat and Back Replacing Seat UpholsteryBack Cane Wheelchair Frame Locknuts Mounting Screws Replacing Back UpholsteryWasher Mounting Screws Back Upholstery Back Cane Adjusting Back Height Cane to the wheelchair frame are not shown for clarityAdjusting Seat Width and Depth Permanent Axles Removing/Installing Rear WheelsRear Wheels Inside Wheelchair Quick-Release AxlesDetail a Detent balls and detent pin Outside WheelchairAdjusting the Quick-Release Axle Wheelchair Frame Locknut Locking PinsReplacing Rear Wheel Handrim Replacing Rear Wheel HandrimInstalling/Replacing Front Casters and Forks Front CastersReplacing/Repairing Front Caster Tire/Tube Adjusting Front Caster MountingInstalling/Adjusting Anti-tippers Anti-tippers/Wheel LocksAnti-Tipper Release Buttons Rear Frame Tubing Installing Anti-Tippers1101959 1058752 Anti-Tipper LengthAdjusting Anti-Tippers InchesPull-To-Lock Using Patient Operated Wheel LocksPush-To-Lock Pull wheel lock handle toward the tire to engage wheel lockWheel Lock Wheel Lock Shoe Rear Wheel Adjusting Patient-Operated Wheel LocksAdjusting Patient-Operated Wheel Locks Inch 3/16-inch pneumatic tires Wheel Lock Shoe TireRecliner Operating ReclinerUpright Position Reclined PositionInstalling/Removing Headrest Extension Replacing Headrest PillowKnob Back Upholstery Replacing Headrest/Back Upholstery Headrest UpholsteryBack Upholstery Removing From Stored Position Adjusting Headrest/Back Upholstery TensionStoring/Replacing Spreader Bar Storing Spreader Bar Headrest Upholstery Spreader Bar BackReplacing Spreader Bar Adjusting the Seat Width and DepthPlacing In Stored Position Installing Telescoping I.V. Rod/O2 Holders OptionsTie Wrap CleaningDetail a I.V. Rod/O Detail B O 2 holder Holder Step Tube LocknutInstalling the 1-inch Forward Rear Wheel Positioner Wheel PositionerRepeat Steps 1-3 for the opposite stroller handle Installing/Adjusting Stroller Handles RemovingHeight Adjustment Repeat Steps 1 3 for the opposite stroller handleInstalling the Wheel Lock Extension Handle Installing/Removing the Solid Seat Insert InstallingInstalling/Removing the Solid Back Insert Invacare Jymni Pediatric Series Wheelchair Invacare Jymni Pediatric Series Wheelchair Canada One Invacare Way
Top Page Image Contents