8 REAR WHEELS
8 Rear Wheels
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or damage may occur.
Except where noted, the procedures in this section apply to
8.1Removing/Installing Rear Wheels
WARNING
Only a qualified technician may change the size of the rear wheel or the
Permanent Axles
If replacing the same size rear wheel, note the mounting position on the wheelchair frame for proper reinstallation of the new rear wheel.
1.Remove the dust cap (if applicable), mounting screw and locknut that secure the rear wheel and axle spacer to the wheelchair.
2.Repeat STEP 1 for the opposite rear wheel.
3.To reinstall the rear wheel onto the wheelchair, reverse STEPS
Wheelchair Frame
Axle Mounting Positions
Rear Wheel
Dust Cap
Mounting Screw
Lock Nut
Axle Spacer
FIGURE 1 Removing/Installing Rear Wheels - Permanent Axles
Invacare® Jymni™ Pediatric Series Wheelchair | 48 | Part No 1100868 |