Leica MZ75, MZ16 A, MS5 Tilting, Secure as described on, Distance, Raise or lower, Horizontal arm

Microscope carrier ➜ drive housing

Optics carrier ➜ microscope carrier

Tilting

Focusing with coarse/fine drive

￿Secure as described on page 34.

￿Secure as described on page 34.

Possible adjustments

￿Release the clamping lever.

￿Tilt the instrument.

￿Retighten the clamping lever.

￿Set large distances with the larger knob.

￿Fine-focus with the smaller (concentric) knob.

￿Using the ring on the right-hand drive knob, adjust the ease of movement of the drive.

Altering the working	￿ Release the clamping screw.
distance	￿ Raise or lower the
	horizontal arm.
	￿ Retighten the clamping screw.
	Reposition the safety ring (see page 30).

Sideways movement ￿ Release the clamping screw.

￿Pull out or push in the horizontal arm.

￿Retighten the clamping screw.

During the sideways movement, observe the limit stops (see page 30).

Altering the overhang ￿ Release the clamping screw.

￿Displace the horizontal arm.

￿Retighten the clamping screw.

Leica M Stereomicroscopes – Assembly 31