Leica MZ16 A, MS5, MZ6, MZ125, MZ16 FA, MZ95, MZ75 W incident lamp, Retighten the clamping screw

Page 40

6 V/10 W incident lamp

•The 6 V/10 W lamp is an inclined incident source for illuminating spatial objects

•By using two lamps, you can soften or eliminate shadows.

•At the nominal voltage (6 V), the color temperature is 2700 K.

Assembly Release the clamping screw. Unfold the lampholder arm.

Retighten the clamping screw.

Lampholder ➜ Use the screw to secure the clamp to clamp for side-facedthe side-faced column, either above or

columns below the focusing drive.

Use the connector to attach the lamp- holder arm to the clamp, on either the right or the left.

Lampholder ➜ Fit the ∅ 25 mm adapter to the cast foot.

cast foot Using the connector, attach the lampholder to the adapter.

Lampholder ➜ Remove the objective.

objective Slide the adapter over the objective.

Using the connector, attach the lampholder to the adapter.

Lampholder ➜ Unscrew a connector from the lampholder. inclinable focusing Release the clamping screw.

drive Using the thread, secure the lampholder to the focusing drive.

Retighten the clamping screw.

Lamp housing ➜ Attach the lamp to the connector on lampholder arm the lampholder arm.

Fit the filter holder, complete with KG1 heat-absorbing filter, to one of the pegs.

•A total of 4 filter holders with ∅ 50 mm filters can be attached.

40	Leica M Stereomicroscopes – Illuminations

Image 40

Contents Leica M Stereo Microscopes Page Dear User Stereo & Macroscope SystemsTable of contents Illuminators AccessoriesSpecial notes Safety concept Safety regulations ServicingResponsibilities InstrumentElectrically-operated items Action Safety instructionsExplanatory notes Overview StereomicroscopeBinocular tube Leica MS5Leica MZ95 Leica MZ75Leica MZ125 Use Magnification changerScale FieldsView ObjectivesFor fatigue-free work, use the ErgoModules Ergonomics, viewing heightPlease also observe the note on p Interpupillary distance, eye contact Together or further apartLeica M Stereomicroscopes Operation Larger knob Microscope carrier AX Microscope carrierMicroscope carrier This microscope carrier permits only Axial observation Aperture Please noteTest object objective Adjusting diopter settings and parfocalityEngage the lowest magnification position Position AdjustingDo not look into the eyepieces Assembly ComponentsStand Incident-light stand Transmitted-light standInsert the stage plate SeeFollow the safety instructions given on Transmitted-light stand, bright field, 20 WChanging fuses Use Two 160 mAT fuses for voltages between 200-240Transmitted-light stand, bright and dark field Transmitted-light stand HL Safety ring column Swinging-arm stand ESDBe fixed beneath the cross-member ColumnReposition the safety ring see Possible adjustmentsOn the cross-member Retighten the clamping screw Large swinging-arm and table-clamp stands LimitationTilting Secure as described onDistance Raise or lowerOptics carrier, optical accessories AchromatObjective combinations MS5 MZ6Drive housing Optics carrierOptical accessories Move the binocular tube from side toObjective nosepiece Matic objective Transformers IlluminatorsRegulating transformer Changing fuses Step transformerOverload 10 W incident lamp Operating the lamp Observe the safety notes on Former on20 W incident lamp Transformer on Never touch the bulb when it is hot You may sustain burns Changing the bulbLeica L2 cold-light source Cold light source Leica CLS series Leica LED illuminationSupply line lamp 25W Coaxial illuminatorNear-vertical illuminator Page Tubes AccessoriesDouble-iris diaphragm Discussion tube Drawing tubeMove the lever to the black spot Video/phototubes 3, 1/2, 1/3 Mount, CCD cameras Leica DC camerasTrinocular video/phototube 50% Video/phototube aMove lever to the left Trinocular video/phototube 100% Light partition 100% in both eyepieces. setting VISTighten the coupling ring Light partition Video/phototube HD50For observation Attachment for vertical and oblique observation GraticulesSpacer rings are required for the Leica Only usable with 1⋅ achromatic objec- tiveStages Polarization, transmitted lightTips and hints What to do if … TV, photographyCare, maintenance Cleaning Dust and dirt will affect the quality of your resultsCalculation Optical data of Leica MS5, MZ6 Eyepieces25⋅/9.5B Optical data of Leica MZ75, MZ95 10⋅/21B38.2 24.7 Optical data of Leica MZ125, MZ16, MZ16 a Zoom positions 0.71 and 11.5 only for MZ16/MZ16 aWith incident-light stand Dimensions of Leica MS5Measurements in mm Dimensions of Leica MZ6 Dimensions of Leica MZ75 Dimensions of Leica MZ95 Dimensions of Leica MZ125 Dimensions of Leica MZ16 Dimensions of Leica MZ16 a Transmitted-light base 20 W Technical Data Technical data electronic devicesRegulating transformer Technichal data Page Leica Microsystems the brand for outstanding products