Operating the lamp | Observe the safety notes on page 7. |
| Observe the notes with respect to the use of the |
| transformer on page 38. |
Connect the cable between the lamp housing and the trans- former (page 38).
Switch on the transformer and use the
rotary knob to adjust the brightness.
Illuminating the object Push the condenser lens forwards or backwards until the slider engages.
Hold the lamp housing and release the clamping screw.
Align the light spot with the object.
Retighten the clamping screw.
Adjust the size of the light spot by moving the condenser lens forward or back.
If necessary, swing in a filter (page 42).
Leica M Stereomicroscopes – Illuminations | 43 |