Network Configuration
Network Configuration is used to assign administrative settings. All of these settings are also available from the
Assignments in this menu are used to manage the network settings for the UIP300G. Users can enter the Network Configuration menu from the Configuration Menu. There are six network configurations that can be retrieved or modified.
◆Enable/Disable Dynamic Host Configuration Protocol (DHCP IP Assignment for the Terminals)
◆Terminal IP Address
◆Terminal Subnet Mask
◆Default Gateway IP Address
◆Enable/Disable VLAN
◆VLAN ID
To access the Network Configuration menu and assign administrative settings:
1.Press MENU key.
2.Use the or keys to access the Configuration menu, then press SELECT key.
Setup Menu: | 3/4 |
Configuration
3.Use the or keys to access the Network Configuration menu, then press SELECT key.
Configuration Menu: 2/3
Network Configuration
46