Uniden UIP300G manual Terminal Subnet Mask, Network Config Subnet Mask

Page 51

To change the IP address:

1.If already in the Network Configuration menu, use the or keys to access the IP address option.

2.Press SELECT key to display the current IP address.

3.Press SELECT key again and enter the new IP address. The format of the IP address is:

XXX.XXX.XXX.XXX

Numbers 0~255 are valid entries for the IP address.

4.After the correct IP address is entered, press SELECT key and restart the telephone, or press CANCEL/DEL key to cancel restart the phone and continue setting up the telephone.

• Pressing CANCEL/DEL key returns to the previous menu. To exit programming and return the telephone to standby mode, press MENU key.

•The new IP address is not recognized until the telephone has been reinitialized. Once the telephone restarts, a restart confirmation message is displayed on the LCD. “Initializing...\” is displayed in the LCD while the telephone resets. If an error occurs during the initialization process, the message “Cannot Save” is displayed in the LCD for one second before returning the IP address menu.

Terminal Subnet Mask

This option is used to set/retrieve the terminal network mask. If the DHCP is enabled (turned on), the terminal mask is obtained from the DHCP server when the telephone initializes. If the user sets the network mask, it is overwritten by the value obtained from the DHCP server when the telephone is reinitialized.

Network Config:

3/6

Subnet Mask

To set/retrieve the subnet mask:

1.If already in the Network Configuration menu, use the or keys to access the Subnet Mask option.

2.Press SELECT key to display the current Subnet address.

User will not be allowed to change value if DHCP is set to “enabled”.

49

Image 51

Contents Guide This Document PrefaceRegulatory Information Important Safety Considerations Important Electrical Considerations FCC Wants You to KnowAC Adapter Table of Contents Setup Menu Vlan ID AppendixNormal Phone Book Record Data Input Sequence List of FiguresGeneral Information Product DescriptionStandard Features of the Telephone VoIP Specific FeaturesGeneral Features Control and Functions of the Telephone Function KeysLED Status Speaker SpecificationsPower Supply Physical InterfaceOptional & Replacement Equipment Optional & Replacement EquipmentAttaching the Footstand to the Telephone Installation and Basic Setup InstructionsPlugging Handset Cord into Telephone Connecting the TelephoneConfiguration Menu 2/3 Network Configuration Quick Setup ProcedureTerminal Configuration using the UIP300G Setup Menu ConfigurationNetwork Config Dhcp Disabled Incorrect PasswordNetwork Config Subnet Mask Network Config IP AddressNetwork Config Default Gateway Web Login Screen Web Browser ConfigurationAlias Phone # H323ID Alias GK/GW ModeGK/GW IP Address GK/GW Port#Codec Configuration Initializing...\ Basic OperationsTelephone Operations Standby07/02/02430PM Using the HandsetUsing the Phone Book Originating Outgoing CallsLine Operation Receiving CallsHandset Volume Volume ControlAccessing a Line Using the Line Key Handset Volume ControlSpeakerphone Volume Control Headset Volume ControlRinger Volume Control Feature Operations HandsfreePhone Book Voice Mail Programmable and Fixed Function KeysSpeed Dial Do Not Disturb DNDMute RedialRedial Call Logs Redial Dtmf StringWay Conference Call Local Mixing Hold Dtmf StringTransfer ConferenceSetup Menu Basic Setup Menu OptionsCall Log Submenu Choose a Call Log Record Setup Menu Call LogsDate/Time information of a Call Log Record Dial a Call Log RecordSave a Call Log Record Delete a Single Call Log RecordDelete All Records in Any Call Log Group Phone Book SubmenuSearching Telephone Records Name SearchTo perform a name search Add a Phone Book Record Peterson, John 98173334444Quick Search To perform a quick searchEnter Name Lower Barbara Anderson Phone Book is FullName Exists Replace? No Cancel Yes Select Enter Phone NumberCould not save Phone Book Menu Delete Edit a Phone Book RecordPhone Book Menu Edit Delete Phone Book RecordsDelete All Records Delete a Single RecordPhone Configuration Menu Telephone ConfigurationCall Duration Configuration Menu 1/3 Phone ConfigurationLocal Date/Time Phone Configuration 2/5 Local Date / TimeLCD Contrast Phone Configuration 3/5 Ringer TonePhone Configuration 4/5 LCD Contrast Ringer ToneFunction Key Phone Configuration 5/5 Function KeyNetwork Configuration Network Config Dhcp Enabled Enable/Disable DhcpTerminal IP Address Press Select to RestartTerminal Subnet Mask Default Gateway IP Address Network Config Vlan Disabled Enable/Disable VlanNetwork Config Vlan ID4095 Press Select to Change4095 Setup Menu View Info Restore Factory SettingsConfiguration Menu 3/3 Restore Factory Setting Confirm Restore No Cancel Yes SelectUser Configuration Web-Based Setup and ConfigurationUser Main Phone Settings Phone Settings ConfigurationFunction Key Configuration Phone Book 10 Phone Book Configuration11 Password Change Password Change12 Web Login Screen Administrator Configuration13 Administrative Configuration Main 14 Network Configuration Network Configuration15 H.323 Configuration ConfigurationSntp Server 16 Sntp Server Configuration17 Codec Configuration Enter the User ID and Password Add/Del User and PasswordEnter the Old Admin Password Enter the New Admin Password Change Administrator’s PasswordEnter the Tftp Server IP Address Update FirmwareErasing Flash Firmware Update CompletedDownloading Firmware Uip300encge100.ftp Calculating Checksum Please WaitEnter the Config File Name Update Configuration FileDownloading Config Uip300setting.txt Updating ConfigConfig File Download Completed Appendix Factory Default SettingsDisplayoff Setup Menu Setup Menu Tree