3.Press SELECT key again and enter the Subnet Mask. The format of the Subnet Mask is: XXX.XXX.XXX.XXX
\
Numbers 0~255 are valid entries for the Subnet Mask.
4.After the correct Subnet Mask is entered, press SELECT key and restart the telephone, or press CANCEL/DEL key to cancel restart the phone and continue setting up the telephone.
• Pressing CANCEL/DEL key returns to the previous menu. To exit programming and return the telephone to standby mode, press MENU key. If LINE1, LINE2, SPEAKER/HEADSET are pressed or if the handset is picked up, the telephone goes
•If the Subnet Mask is not valid, “Invalid Input” is displayed for one second before returning the display to the Subnet Mask.
•The new Subnet Mask address is not recognized until the telephone has been reinitialized. Once the telephone restarts, a restart confirmation message is displayed on the LCD. “Initializing...\” is displayed in the LCD while the telephone resets.
Default Gateway IP Address
This option is used to read/write the default Gateway IP address.
Network Config: | 4/6 |
Default Gateway
To read/write the default Gateway IP address:
1.If already in the Network Configuration menu, use the or keys to access the Default Gateway option.
2.Press SELECT key to display the current Default Gateway.
3.Press SELECT key again and enter the default Gateway IP address. The format of the default Gateway IP address is: XXX.XXX.XXX.XXX
Numbers 0~255 are valid entries for the default Gateway IP Address.
4.After the correct Default Gateway IP address is entered, press SELECT key and restart the telephone, or press CANCEL/DEL key to cancel restart the phone and continue setting up the telephone.
Pressing CANCEL/DEL key returns to the previous menu. To exit programming and return the telephone to standby mode, press MENU key.
50