The Basics
Conference Calls
Conference Calls
You can conference together up to eight parties (including your own) - with up to six parties being external network lines. The actual number of conference parties with acceptable volume levels depends on the local and far end telephone line conditions.
The person who initiates the conference call is the Master. If, after the conference is established, the Master exits the conference, and the first station to have been added to the conference becomes the Master.
äTo conference calls
1.While on a call, press Flash. You hear dial tone.
2.Call another station or outside line.
3.When the called party answers, press Flash. If you receive a busy tone or no answer, press Flash again to return to the original connection.
4.All parties are conferenced.
5.Repeat the above steps to add lines to the conference. Keep in mind the maximum number of allowed conference parties.
Note When the “master” of the conference hangs up, control is automatically transferred to the first internal station added to the conference call. If no other internal stations are included in the conference call, the call will be disconnected.
äTo transfer conference control
1.Do Steps 1 and 2 above to add the line you wish to transfer conference control to. See previous Note.
2.Announce the call and hang up to transfer the call. This station now becomes the conference “master” with the ability to add or delete parties.
Strata CIX Standard Telephone 02/06 | 5 |