Mitel 5624 manual LED Indications during Easy Replacement, LED indication Description

Page 82

5624 Wireless Handset User Guide

1On the new handset, press and hold

Note: Do not release until you are instructed to do so.

2Put the new handset in the charger.

3

When the text "Start phone replacement?" appears, release

 

.

 

Press "Yes" (left soft key).

 

 

 

 

 

 

The text "Follow the instructions. Each step can take several minutes." appears.

 

Press "OK"(left soft key).

 

 

 

4, 5 When the text "Please insert old phone in charger" appears, replace the new handset with the

 

old handset. The handset can either be switched on or off.

 

 

 

Note: If the rack charger is used, the same charging slot has to be used for both handsets.

 

The handset will be restarted and after a few seconds.

 

 

 

The text "Saving settings appears.

 

 

 

Do not remove phone from charger" appears. The charger LED changes to slow orange

 

flashing.

 

 

IMPORTANT: Do not remove the handset while the text "Saving settings. Do not remove phone from charger" appears. It may take several minutes.

6, 7 When the text "Please insert new phone in charger" appears, replace the old handset with the new handset.

The text "Restoring settings" appears.

IMPORTANT: Do not remove the handset while the text "Restoring settings" appears

8

When the text "Phone successfully replaced. Please remove phone to restart." appears, remove the handset from the charger. The handset is automatically restarted.

LED Indications during Easy Replacement

The following table shows the LED indications that are used for the 5624 and the charger during the easy replacement procedure.

LED indication

Description

 

 

Orange, flashing (1 000 ms on, 1 000 ms off)

File transfer during Easy Replacement

 

 

Orange, flashing (100 ms on, 800 ms off)

“Change phone” indication during Easy Replacement

 

 

Red, flashing (100 ms on, 800 ms off)

Error indication during Easy Replacement. Put back old

 

handset in charger

 

 

Red, flashing (900 ms on, 100 ms off)

Error during Easy Replacement. Service required for

 

both handsets

 

 

See the Mitel 5624 Wireless Handset Configuration Guide.

74

Image 82
Contents Wireless Handset Trademarks Iii Mitel WiFi System Emea User Guide Navigate the Menu Troubleshooting Operation Notice Vii Mitel WiFi System Emea User Guide Viii About Your Phone 5624 HandsetElements of the Handset Multi-function buttonFeatures and Functions Desktop Charger Battery Pack ChargerChargers Rack ChargerFrequency Range Contacting Emergency ServicesTips for your Comfort and Safety Dont Cradle the HandsetEnvironmental Requirements Exposure to Radio Frequency SignalsHandset Icons and Text in the Display Chemical ResistanceIcons Menu icons System dependent Keys and Buttons Hot Keys Volume ButtonAlphanumeric Keys Multifunction ButtonStandby Mode and Number Input Mode HeadsetsText Input Mode Customizing Your Phone Switch the Handset OnSwitch the Handset Off Log a Shared Phone On/OffLock/Unlock the Keypad Turn On/Off the Audible SignalLock/Unlock the Keypad in Idle Mode Log On a HandsetLock the Keypad Lock/Unlock the HandsetLock/Unlock the Keypad during a Call Unlock KeypadMake a Call Making and Answering CallsCall List Pre-DialDial a Name from the Central Phonebook Dial the Sender of a MessageDial a Number from the Local Phonebook Dial a Number from the Company PhonebookAnswer a Call Answer a CallDuring a Call End a CallOpen Contacts during a Call Adjust the Volume during a CallTurn on/off the Microphone during a Call Start a New Call during a Conversation Lock/Unlock the Keypad during a CallUnlock the Keypad Transfer to a New Call Unsupervised Call HandlingHold Supervised TransferAnswer Call Waiting ConferenceConference Split Call Park Advanced Features Call ForwardDirect Call PickupDo Not Disturb GroupMessage List Incoming Message for the 5624 Services LicenseMessaging Receive a MessageForward a Message Reply to a MessageDelete a Message Call the Sender of the MessageSave a Number Call a Number Included in a MessageWrite and Send a Message Send a Message to Another Destination Receive a Message with Request for AnswerOpen a Sent Message Accept/Reject the MessageMessage Queuing and Message Priority Message Queuing and PriorityInteractive Messaging Interactive MessageMobile Data Colored MessagingSend Mobile Data Send Mobile Data with a Prefix One Key Voice Mail AccessVoice Mail Receive a Voice MailAcoustic Location Signal Alarm OperationPush-button Alarm Test AlarmAlarm with Data Automatic Call after AlarmMenu Tree Customizing the Menu TreeCalls Contacts Profile Messaging Services Administrator can configure PPTShort cuts Settings ConnectionsMenu Tree Call Additional In Call FunctionsNavigate the Menu HeadsetsConnections Menu Charger Calls MenuCall List Missed Calls PTT Voice Style Calls Handset initiated Push to TalkAccept a PTT Invitation Voice Style Accept a PTT Invitation Message Style Reject a PTT Invitation Voice StylePTT Message Style System/Application initiated Reject a PTT Invitation Message StyleShort Cuts Menu Define Soft KeysDefine Hot Keys Define Navigation KeysDefine the Multifunction or Alarm1 Button Services MenuAdd a Service Inbox Edit a ServiceDelete a Service Reply to a SenderCall a Sender Forward a MessageCall a Number in Text Sent Messages Write New MessagesUnsent Messages Delete/Delete AllDelete a Profile Profiles MenuAdd a new Profile Edit a ProfileAdd a Contact Contacts MenuCall a Contact Add a New ContactCentral Phonebook Edit a ContactDelete a Contact Add a Contact from the Call ListSettings Menu Sound and Alert SettingsTurn the Vibrator On/Off Phone Lock SettingsSet Message Alerts for Mail Set the Key SoundDeactivate the Phone Lock Activate the Phone LockChange the PIN Code Display Settings Time and Date SettingsSet the Date Format AnsweringAnswering Key Change Owner ID Change Text Size for MessagesChange the Menu Language Answering BehaviorTroubleshooting Operational ProblemsError or Warning Messages Display shows Probable cause Action or commentLED Error Indications See the Mitel 5624 Wireless Handset Configuration GuideOperating Area Accessibility and Voice QualityOperation Notice Out of RangeMaintenance Maintenance of BatteriesEasy Replacement of Handset Before Starting the Easy Replacement ProcedureEasy Replacement Procedure Easy Replacement using the 5624 ProgrammerLED Indications during Easy Replacement LED indication DescriptionAttach the Hinge-type Clip Attach the Swivel-type ClipAttach a Cover without a Clip Related DocumentsIndex Numerics
Related manuals
Manual 86 pages 60.36 Kb Manual 95 pages 9.13 Kb

5624 specifications

The Mitel 5624 is an advanced IP phone designed for professional environments, providing users with a blend of functionality, flexibility, and easy-to-use features. As part of Mitel’s extensive lineup of communication solutions, the 5624 is tailored for both small and medium businesses as well as larger enterprises. It boasts high-quality audio and a user-friendly interface, making it a popular choice among professionals.

One of the standout features of the Mitel 5624 is its support for dual-mode operation, enabling it to function effectively both as a desktop phone and as a mobile device via Wi-Fi connectivity. This versatility means that employees can remain connected regardless of their physical location within an office setting. The phone is equipped with a large, backlit LCD display that provides easy navigation through the menu and access to various features.

The Mitel 5624 also features a range of programmable keys, allowing users to personalize their setups according to their specific needs. These programmable buttons can be set up for quick access to frequently dialed numbers, features like hold and transfer, or even for managing multiple lines.

With respect to audio quality, the Mitel 5624 offers HD voice technology, which enhances clarity during conversations, reducing background noise and improving overall sound quality. This ensures that users can engage in clear and uninterrupted discussions, an essential aspect for productivity in any professional atmosphere.

Security is another crucial aspect of the Mitel 5624, which supports industry-standard encryption protocols. This ensures that data transmission remains secure, safeguarding sensitive information and maintaining privacy during calls.

In terms of connectivity, the Mitel 5624 offers a variety of options, including wired Ethernet and the ability to connect through Wi-Fi. This flexibility allows organizations to tailor their network setups according to their existing infrastructure.

The phone is designed with user comfort in mind, featuring an ergonomic design, adjustable stand, and a headset port for those who prefer hands-free communication. Coupled with its robust build quality, the Mitel 5624 is suited for heavy usage in both office settings and on-the-go scenarios.

In conclusion, the Mitel 5624 IP phone is a versatile and powerful tool that enhances communication within businesses. Its combination of advanced technologies, user-friendly features, and a focus on security makes it an ideal choice for modern professional environments. Whether used for traditional desk work or mobile communication, the Mitel 5624 stands out as a reliable and efficient solution for all communication needs.