Mitel 5505 manual Charging the Handset, Care of the Handsets, Battery Specification

Page 15

Registration and Configuration

Battery Specification

Technology: Nickel-metal-hydride (NiMH)

Size: AAA (Micro, HR03)

Voltage: 1.2 V

Capacity: 400–800 mAh

The following types of battery are recommended:

GP GP55AAAHCR 550mAh

SHP HFR-44AAAJ550 550mAh

SUPPO HSY-AAA0.55-C 550mAh

The handset is supplied with the recommended batteries.

Charging the Handset

It is recommended that you charge the handset battery fully before first use.

1.Charge the battery. It takes approximately 8 hours to fully charge the battery.

2.Then remove the handset for use.

Care of the Handsets

Wipe the charging cradle and the handset with a damp cloth (do not use solvent) or an antistatic cloth. Never use a dry cloth. This can cause static.

If the handset should come into contact with liquid:

Switch the handset off and remove the batteries immediately.

Allow the liquid to drain from the handset.

Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc.).

Do not switch on the handset again until it is completely dry.

When it has fully dried out, it can be used again.

9

Image 15 Contents
`çããìåáÅ~íáçåë=aáêÉÅíçê Trademarks Introduction Cordless Handset Maintenance and Troubleshooting Guest IP Phone Administration Guide FåíêçÇìÅíáçå Guest IP Phone Administration Guide About This Guide IntroductionRelated Documentation OÉÖáëíê~íáçå=~åÇ=`çåÑáÖìê~íáçå Guest IP Phone Administration Guide Registration and Configuration Preparing the Cordless Handset and Installing the Batteries Battery Specification Charging the HandsetCare of the Handsets Registering the 5505 Guest IP Phone Connecting the Charging Cradle Optional Pairing the 5505 Cordless Handsets Deleting/Replacing Paired Handsets Restoring the Base Station Default Settings Reset to Factory Default SettingsDate and Time Restoring the Handset Default SettingsRe-Registering the 5505 Guest IP Phone Firmware UpgradesDhcp Options Form MCD Programming RequiredUser and Device Configuration Form Feature Access Code SupportOther MCD ESM Forms RRMR=mÜçåÉ=~ëÉ Guest IP Phone Administration Guide Emergency Calls 5505 Guest IP Phone Features and Function of the 5505 Guest IP PhoneFeature Function Adjusting the Speaker Volume Adjusting the Ringer VolumeCustomizing the 5505 Guest IP Phone Call Handling Making and Answering CallsLocating Handsets Using Other FeaturesUsing Speed Dial Keys Retrieving MessagesRRMR=`çêÇäÉëë=e~åÇëÉí Guest IP Phone Administration Guide Out of Range Indication Charging the BatteryCordless Handset Keys and Functions Features and Functions of the Cordless HandsetDisplay and Display Back Light Display Keys on the Handset/Using the MenuUsing the Handset Menu Menu Sub Menu Description Menu Tree and Customizing the HandsetTurning the Handset On Turning the Ringer On/Off Adjusting the Handset VolumeJoining a Call/Conference Using Last Number Redial Using the Phonebook/DirectoryUsing Speed Dials Guest IP Phone Administration Guide ~áåíÉå~åÅÉ=~åÇ=qêçìÄäÉëÜççíáåÖ Guest IP Phone Administration Guide Frequently Asked Questions/Troubleshooting ChecklistPhone State During Startup and First Registration
Related manuals
Manual 50 pages 48.25 Kb