![](/images/new-backgrounds/1251152/25115239x1.webp)
5505 Guest IP Phone Administration Guide
Reset to Factory (Default) Settings
You can set the Base Station unit or the cordless handset to factory defaults
Restoring the Base Station Default Settings
1.On the Base Station, press down the Volume Up/Down key on the base station.
2.Then release the Volume Down (
3.While the Volume Up key is pressed, type 3228679 (FACTORY) to start the factory process.
The Line in Use key will flash for confirmation.
4.Release the Volume Up key and press * to confirm or any other key to cancel.
Settings are restored to factory settings, except for the pairing data. The base station is rebooted. The message “NO DN PROGRMED is displayed on the handset.
14