Mitel manual Re-Registering the 5505 Guest IP Phone, Firmware Upgrades

Page 22

5505 Guest IP Phone Administration Guide

Re-Registering the 5505 Guest IP Phone

The 5505 Guest IP Phone will require re-registration when the DN is changed for the phone and/or when the User PIN is changed.

To re-register the phone:

1.On the 5505 base station, press down the Volume Up/Down key on the base station.

2.Then release the Volume Down ( -) portion.

3.While the Volume Up key is pressed, type 734 (REG) to start the re-registration process.

The Line in Use keys start flashing slowly waiting for the DN number and Registration PIN.

4.Enter the DN and registration PIN as DN#PIN#.

5.Press the Speaker key.

If an invalid DN or invalid PIN is entered, the cordless handset will display DN followed by !REG or ! for DNs, indicating that the phone is not registered. Try the registration again. See “Maintenance and Troubleshooting” on page 39 if the procedure is unsuccessful.

After successful registration, the screen displays the Room Name/Number.

6.At any time, to exit from the re-registration mode, press the End Call key on the 5505 base station.

Firmware Upgrades

The 5505 IP Phone checks its tftp server every day at 3 a.m. If there is new firmware, the phone performs an upgrade.

If the phone is on a call at 3 am, it waits until it is idle before doing the firmware check.

16

Image 22

Contents `çããìåáÅ~íáçåë=aáêÉÅíçê Trademarks Introduction Cordless Handset Maintenance and Troubleshooting Guest IP Phone Administration Guide FåíêçÇìÅíáçå Guest IP Phone Administration Guide Introduction About This GuideRelated Documentation OÉÖáëíê~íáçå=~åÇ=`çåÑáÖìê~íáçå Guest IP Phone Administration Guide Registration and Configuration Preparing the Cordless Handset and Installing the Batteries Charging the Handset Battery SpecificationCare of the Handsets Registering the 5505 Guest IP Phone Connecting the Charging Cradle Optional Pairing the 5505 Cordless Handsets Deleting/Replacing Paired Handsets Reset to Factory Default Settings Restoring the Base Station Default SettingsRestoring the Handset Default Settings Date and TimeFirmware Upgrades Re-Registering the 5505 Guest IP PhoneMCD Programming Required Dhcp Options FormFeature Access Code Support User and Device Configuration FormOther MCD ESM Forms RRMR=mÜçåÉ=~ëÉ Guest IP Phone Administration Guide Emergency Calls Features and Function of the 5505 Guest IP Phone 5505 Guest IP PhoneFeature Function Adjusting the Ringer Volume Adjusting the Speaker VolumeCustomizing the 5505 Guest IP Phone Making and Answering Calls Call HandlingRetrieving Messages Using Other FeaturesUsing Speed Dial Keys Locating HandsetsRRMR=`çêÇäÉëë=e~åÇëÉí Guest IP Phone Administration Guide Charging the Battery Out of Range IndicationFeatures and Functions of the Cordless Handset Cordless Handset Keys and FunctionsDisplay Keys on the Handset/Using the Menu Display and Display Back LightUsing the Handset Menu Menu Tree and Customizing the Handset Menu Sub Menu DescriptionTurning the Handset On Adjusting the Handset Volume Turning the Ringer On/OffJoining a Call/Conference Using the Phonebook/Directory Using Last Number RedialUsing Speed Dials Guest IP Phone Administration Guide ~áåíÉå~åÅÉ=~åÇ=qêçìÄäÉëÜççíáåÖ Guest IP Phone Administration Guide Checklist Frequently Asked Questions/TroubleshootingPhone State During Startup and First Registration