Toshiba IPT manual Advanced Speed Dial Operation, DKT3014-SDL Name Storage

Advanced Operation

Storing a System/Station Speed Dial Number

DKT3014-SDL Name Storage

If you have a DKT3014-SDL phone, you can store names for Personal SD numbers (see “Storing Personal Speed Dial Names” on page 66).

Advanced Speed Dial Operation

Special Characters

SD numbers may include ￿~￿, ￿, ￿ and Pause.

Table 7 Phone Number Dial String Characters

￿￿￿a￿￿￿	Meaning	￿￿￿
Entrya￿
￿	0~9
	End of Speed Dial Number when entering via access code (￿￿￿)
	Escape. “￿” functions as an escape key indicating that the number immediately
	following represents something exceptional. When ￿ is used as an escape
	character, it consumes one Speed Dial digit. Entering ￿￿to insert a seven-second
	pause would use two of 32 characters.
￿￿	A pause from 1~9 seconds. To pause longer than 9 seconds, enter more pause
	escape sequences. Example: To insert a 17-second pause, press	￿. A “P”
	displays denoting a pause in the SD number. In this example, you would see “PP.”
￿￿	is entered into the speed dial string.
￿￿	￿is entered into the speed dial string.

Long SD Numbers

Up to 32 digits can be stored in one SD number bin. If you exceed 32 digits, the excess are stored in the next higher bin and consume the next sequential SD number.

You can dial the entire string by entering the original SD number. All digits will be sent, including those in excess of 32. If that were Speed Dial Number 100, Number 101 would no longer be available. You are not prevented from storing a new Number 101 but, if you do, Number 100 will be shortened to 32 digits.

54 Strata CTX DKT/IPT Telephone 10/03