GE 25860 manual Caller ID Solutions

Handset does not ring

•Make sure the ringer switch on the handset is turned to ON.

•The handset may be out of range of the base. Move closer to the base.

•You may have too many extension phones on your line.Try unplugging some phones.

•Check for dial tone.

You experience static, noise, or fading in and out

•Change channels.

•The handset may be out of range of the base. Move closer to the base.

•Relocate the base. Make sure the base is not plugged into an outlet with another household appliance.

•Charge the battery.

Unit beeps

•Place handset in base for 20 seconds; if it still beeps, charge battery for 16 hours.

•Clean charging contacts on handset and base with a soft cloth or an eraser.

•See solutions for “No dial tone.”

•Replace battery.

Memory Dialing doesn’t work

•Did you program the memory location keys correctly?

•Did you follow proper dialing sequence?

Caller ID Solutions

No Display

•Charge the battery (for 16 hours). Or replace the battery.

•Make sure that the unit is connected to a non-switched electrical outlet. Disconnect the power converter from the outlet and plug it in again.

•You must be subscribed to the standard Name/Number Caller ID service from your local telephone company to receive CID information.

31