GE 25860 Belt Clip and Optional Headset, Changing the Security Code, Attaching the Belt Clip

Changing the Security Code

The default security code for accessing the answering system from another location is 1 2 3.You must use the handset to change the security code. With the phone OFF (not inTALK mode), follow these steps:

1.Press the transfer/answerer button to display ANSWERER REMOTE.

2.Press the *exit button.

3.Enter the new 3-digit security code.

4.Press the *exit button again.The handset announces the new code, pauses, beeps, and then announces the menu options again.

Belt Clip and Optional Headset

Attaching the Belt Clip

1.Insert the sides of the belt clip into the slots on each side of the handset.

2.Snap the belt clip into place.

Connecting an Optional Headset to the Handset

Slot for	Slot for
belt clip	belt clip

The handset can be used with an optional headset for hands free operation.

1.Connect the headset to the headset jack on the side of the handsetThe handset receiver and microphone are disabled when the headset is connected.

2.Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to approximately two to three inches from your mouth.

3.Press the talk/callback button to answer a call or make calls using

the headset.

Headset jack

Headset plug

	talk
	VOL
-	+
re
dial
del
chan
1	2	3
4ghi	5	6
7pqrs	8	9
exit*	0	#
canc

4. To return to normal operation, unplug the headset from the jack.

26