Clarity RC200, RC100 operating instructions Voice Activated answering Unanswered call indicator is

	Voice Activated answering	Unanswered call indicator is	Voice Mail indicator is off,
• is off, (RC200 only).		• on.	•(RC200).
•	Ring volume set to Hi.	”0“ (operator) is programmed into	Remote Flash switch is off,
		• the first memory location of M1.	•(RC200 only).
2 Press 0 on the keypad to		3 Press SCAN button.
	turn it off; or Press 1 key on
	the keypad to turn it on.
2 Press 0 key to turn it off; or		3 Press SCAN button.
	Press 1-9keys to turn it on. See
	Page 5 for rate selection guide.
2 Press MUTE twice.

2Press HEADSET twice.

2Press FLASH/PAUSE twice.

2	Dial the number (up to	3	Select the memory button. Press once for first location, or
	40 digits).		twice for second location.
2	Dial the number.	3	Press ON/OFF button to hang up.
2	The number is dialed in
	7 seconds.
2	When the desired directory	3	Press Remote Transmitter to hang up.
	location is lit, press it again.
2	The first number stored	3	Press Remote Transmitter once to
	under M1 is dialed.		hang up.
2	Press ON/OFF button to hang up.
2	Press Remote Transmitter once to hang up.
2	It hangs up automatically after one minute of silence or when it detects dial tone.

11