Vertical Communications and FX Series manual Setting The Volume Control

Page 52

Using The Other Features

GCA70–198

9.10 Setting The Volume Control

There are four ringer loudness levels (plus an off position). Set the level as follows:

1.While your telephone is on hook and idle, press VOLUME UP or VOLUME DOWN once for each change in loudness that you desire. The ringer sounds once for each change as an example of the current setting. Your selection becomes the new default setting and will result in your telephone ringing at that level for all future calls (until you change the default by repeating the above procedure).

NOTE: If you set the ringer to the “off” position, your telephone will sound a short ring burst once for each call you receive at your station while the ringer is off.

There are eight speaker loudness levels. Set the level for the current call as follows:

1.While on a call and in speakerphone mode, press VOLUME UP or VOLUME DOWN once for each change in loudness that you desire.

There are eight background music loudness levels. Set the level as follows:

1.While background music is on at your station, press VOLUME UP or VOLUME DOWN once for each change in loudness you desire. This level will remain set for background music until you change it again, even if you turn off the feature and then reactivate it.

There are eight handset loudness levels. Set the level for the current call as follows:

1.While on a call and in handset mode, press VOLUME UP or VOLUME DOWN once for each change in loudness that you desire.

9 – 6 LCD Station User's Guide

Image 52
Contents LCD Speakerphone Station User’s Guide System Model Contents Using The Other Telephone Features Sending And Receiving Non-Verbal MessagesTransferring Calls Conferencing CallsOperating Your Telephone With a DSS/BLF Console This page remains blank intentionally Introducing The Telephone Understanding What The Lights MeanExplanation of Light Patterns DigiTech LCD Speakerphone Impression LCD SpeakerphoneUsing The LCD Abbreviations Abbreviation Feature DefinitionClear Music NoANSSdial Using The Speakerphone Speakerphone User GuidelinesGCA70-198 Introducing The Telephone This page remains blank intentionally ∙ To answer a call using the speakerphone Answering Calls∙ To answer a call that is ringing at your telephone ∙ To answer a call that is ringing at any telephoneAnswering a Subdued Off Hook Voice Announcement Sohva Press Intercom∙ To respond verbally ∙ To respond non-verballyForwarding Calls ∙ To forward calls made to your station∙ To cancel call forwarding Accessing Lines Making a CallUsing Last Number Redial ∙ To cancel queuing before it rings back at your telephoneUsing Speed Dial Making a Subdued Off-Hook Voice Announcement Sohva ∙ To send a paging announcement Making a Paging Announcement∙ To reply to a meet-mepage ∙ To activate call waiting when you hear a busy signal ∙ To cancel call waiting∙ To cancel the camp-on condition at any time ∙ When you hear five short tone bursts ∙ To camp on at any busy stationHolding Calls ∙ To cancel directed call hold and retrieve the call ∙ To retrieve a held call at another station∙ To answer a call at the extension receiving held call ∙ You can scan your held calls and retrieve a specific one∙ To park a call Using Call Park∙ To retrieve a parked call This page remains blank intentionally Using the Messaging Feature Non-Verbal MessagesUsing LCD Messaging ∙ To turn on LCD messaging Press IntercomSending An LCD Message This page remains blank intentionally ∙ If you hear a busy signal or receive no answer Transferring Outside Calls∙ To announce a call before transferring it ∙ To transfer a call without first announcing it∙ To make a hot transfer Press TRANSFER/CONFERENCE∙ To do a quick screened transfer to intercom or tie line ∙ To do a quick unscreened transfer to intercom or tie lineConferencing Calls Conferencing Stations TogetherPress the line button of the remaining party Storing DSS Numbers ∙ To store extension numbers at DSS buttonsStoring Feature Buttons ∙ To store special-purpose feature buttonsStoring a Response Message Button ∙ To store a fixed Response Message button Press IntercomProgramming Speed Dial Numbers ∙ To store an outside number as a speed dial numberDial Press the button you want to program ∙ To set a reminder alert at your telephone Setting a Reminder Alert∙ To respond to an alert after it sounds This page remains blank intentionally Adjusting The Display Contrast ∙ To adjust the display contrastBlocking Voice-Announce Calls ∙ To block voice-announce calls∙ To identify the station that occupies a busy line ∙ To identify the line that a busy station occupies∙ To divert calls to the designated station ∙ To cancel group listening∙ To activate group listening while on a call Setting a Do Not Disturb Condition Muting Your Telephone∙ To override an in-progress call at another telephone ∙ To override a Do Not Disturb condition at another stationSetting The Volume Control GCA70-198 Using The Other Features Setting Your Personal Ringing Tones Using Background Music∙ To select one of the ringing tones ∙ To turn the music onOperating Your Telephone DU32X DSS/BLF ConsoleDD32X DSS/BLF Console Publication Index Blocking Voice-Announce CallsIndexGCA70-198 GCA70-198Index Index GCA70-198 Feature Enable Code Disable Code ButtonFeature Enable Code Disable Code Button Mnemonic Intercom LNG01 Intercom # OBS Feature Enable Code Page Page Charlottesville, Virginia