Oricom MI40 manual Using Pre-Dialling, Using Quick Dialling, Using Direct Dialling

Page 9

Using Pre-Dialling

You can enter a telephone number and verify it on the display before you place the call.

•Use the keypad to enter the phone number. The display shows the digits as you enter them.

•If more than 16 digits are entered, the icon will be turned on. Only the last 16 digits will be displayed.

•Press, the number entered will be dialled out.

Note: If you make a mistake, press to erase one digit at a

time or press and hold for 2 seconds to clear the entire number and return to Standby.

Using Quick Dialling

The dial keys 1, 2, 3, 4, 5, 6, 7, 8, and 9 can be linked to a phonebook record.

•During standby, press and hold the key will dial out the number directly.

•The number dialled will be displayed on the LCD.

•If the number is more than 16 digits, the LCD will display the rightmost digits with the icon turn on.

To Set the Quick Dial:

•Press during predial or standby.

•The display reads FEATURES. Press.

•Use to scroll until the display reads QUICK DIAL.

•Press .The display will show KEY 1.

•Use to scroll through KEY 1 to KEY 9. Press on a selection.

•Use to select ON or OFF.

•Press at OFF will de-activate the quick dial feature for the selected key.

•Press at ON will activate the quick dial feature for the selected key. The name of the first record in the phonebook will be displayed.

•Use to scroll through the phonebook records or use the starting letters to select record.

•Press at a record to view the number.

•Press at the number to confirm. The quick dial feature is activated on the selected key.

•Press and hold to return to standby.

Note: If there is no record in the phonebook, press at ON will show EMPTY.

Using Direct Dialling

This feature allows you to store a number in the Direct Dial memory for quick dialling later.

When the direct dial feature is activated, the prompt, DIR DIAL, will be blink on the display during standby. Press any key

except during standby to dial out the designated number.

To activate:

•Press. Use to scroll through the menu until the display reads FEATURES.

•Press. Use to scroll through the menu until the display reads DIR DIAL.

•Press. Use to select ON. Press.

•The display will read NUMBER? Or, the previously entered direct dial number.

•Enter the number to be dialled out.

17 of 72

18 of 72

Image 9

Contents MI40 User guide Additional Features Using the Phone BookCaller ID Answering MachineAppendix Default Settings Warranty Information Using Additional Cordless HandsetsSafety Information Getting StartedUnpacking Your Telephone LCD Display on the HandsetIcon Name Description Basic Steps to Install Battery Level IndicationCharging the Handset Phonebook Menu Menu OverviewCall Log Menu Redial MenuUsing Traditional Dialling Basic OperationsTo End a Call Using Pre-Dialling Using Quick DiallingUsing Direct Dialling Redial the Last Dialled Number by Using Pre-dialling Using Last Number Re-Dialling functionRedial the Last Dialled Number Save the Redial Number in the PhonebookWhen the handset is not on the base unit When the handset is on the base unit, lift the handsetAdjusting the Handset Ringing Volume Delete a Redial NumberHandsfree Operation Using the Handsfree Speaker Adjusting the Receiver VolumeUsing a Headset Not supplied Microphone Mute / Un-muteLow Power Mode Using the Phone BookStoring an Entry Reviewing the PhonebookDialling a number from Phonebook Deleting a Phonebook EntryVIP Ringing Melody Call Waiting Caller ID Caller IDCall Log Reviewing the Call LogSaving the CID record into phonebook Answering MachineDeleting a CID Record Call Back from the Call LogChanging Answering Mode Answering ModeOutgoing Message OGM Recording OGMAnswering Machine On / Off Deleting the customized OGMAnswering Machine Quick OFF MemoDeleting Memo Playing MemoIncoming Message ICM Recording ICMRing Delay Playing ICMDeleting ICM Alert Tone Message LengthSpeaker Filtering OFF Call ScreeningALL ExemptRemote Access Code Block the BlockerSOS Code Remote Access to the Answering Machine Remote Access ShortcutsRemote Access Responses Network Services Additional FeaturesAdding a new Network Service Reviewing Network ServicesDialling out the Service Number Editing Network Service NumberDelete a Network Service Prefix FeaturesCall Barring Following call barring options can be selectedRinger Melody for Internal Calls Ringer Melody for External CallsBase Ringer Melody for External Calls Ringing Volume for BaseAlert Tones ChargingAuto Answering Out of Range WarningRecall Timing Handset NameBacklit LCD Call TimerDelete All Records Using Additional Cordless HandsetsRegistration Base SelectionTo end intercom call Or Use Pre-DiallingRoom Monitoring Conference CallMonitor De-register a HandsetChange the PIN Code for Base Reset Factory DefaultWarranty Information Appendix Default Settings