Remote Access to the Answering Machine
The answering machine can be accessed from other tone dialling telephones.
•Place a call to your phone.
•If the answering machine is on, the OGM plays
o While the OGM is playing, press * and then the
o If the code is entered correctly, you will hear 2 beeps.
The new messages, if any, will be played back starting with the oldest new one. Otherwise, the oldest message will be played back.
You can also enter a short cut within 8 seconds. For example, press 5 to stop the message playing. Press 9 to record a new OGM etc.
o If the code is entered incorrectly, the OGM will be replayed. Use the keypad of the
•If the answering machine is off,
o After 10 rings, the answering machine is turned on. o You will hear 2 beeps and the OGM plays.
o While the OGM is playing, press * then the
o If the code is entered correctly, you will hear 2 beeps.
The new messages, if any, will be played back starting with the oldest new one. Otherwise, the oldest message will be played back.
You can also enter a short cut within 8 seconds. For example, press 5 to stop the message playing. Press 9 to record a new OGM etc.
o If the code is entered incorrectly, the OGM will be replayed. Use the keypad of the
Note: The answering machine will drop the line after three failed attempts.
If there is no incoming message and you do not enter anything within 8 seconds after the remote access code was correctly entered, the line will be dropped.
Remote Access Shortcuts
Shortcuts for most remote access functions are the same as those accessed from answering machine mode except Delete All Messages
•Press * and then 0 within 2 seconds to delete all ICM’s.
Remote Access Responses
Most tones and alerts for remote access operations are the same as those in the answering machine mode except
•When 8 are pressed to turn the answering machine on, two beeps confirmation tone will be heard.
•When 8 are pressed to turn the answering machine off, a short beep tone will be heard.
•When # is pressed to change from ANS ONLY to ANS RECORD mode, two beeps confirmation tone will be heard.
•When # is pressed to change from ANS RECORD to ANS ONLY mode, a short beep tone will be heard.
•If the Memo is recorded when the memory is full, a long beep reject tone will be heard.
47 of 72 | 48 of 72 |