Troubleshooting
6417$.'5*116+0)
2TQDNGO" | 5WIIGUVKQPU | |
|
| |
Low volume or | Someone has picked up another phone on | |
unusual sounds. | the same line. Hang up the other phone. | |
| If you are using the headset, make sure | |
| the headset’s plug is properly connected to | |
| the jack. | |
Severe noise inter- | Keep the handset away from computers, | |
ference. | remote control toys, wireless microphones, | |
| alarm systems, intercoms, room monitors, | |
| fluorescent lights, and electrical appli- | |
| ances. | |
| Move to another location or turn off the | |
| source of interference. | |
|
| |
| Press CHANNEL to change the channel. | |
| Hang up and redial the number. | |
|
| |
| Be sure the base’s phone line cord and AC | |
| adapter are correctly and securely | |
The phone does not | connected. | |
Be sure the battery pack in the handset is | ||
work properly. | ||
connected and charged. | ||
| ||
|
| |
| Return the handset to the base to reset the | |
| security | |
The handset stops | Move the handset closer to the base. | |
working or works |
| |
Be sure the handset’s battery pack is | ||
poorly during a call. | ||
charged. | ||
| ||
The handset’s range | Be sure the handset’s and base’s antenna | |
has decreased and | is not touching a metal surface. | |
the phone cannot be |
| |
operated at a useful |
| |
distance from the |
| |
base because the |
| |
signal becomes |
| |
weak or noisy. |
| |
The handset battery | Check the charging contacts on the hand- | |
pack does not | set and base. If they are dirty, clean them | |
charge. | with a pencil eraser. | |
| Be sure the battery pack is connected cor- | |
| rectly. | |
|
| |
| Be sure the handset is properly seated on | |
| the base. | |
The handset does | Move the handset closer to the base. | |
not ring or receive a |
| |
Return the handset to the base to recharge | ||
page. | ||
the battery pack. | ||
| ||
| Move the base away from other electrical | |
| devices. | |
|
|
10