Radio Shack TAD-1004 owner manual Using Privacy, Memory Dialing, Storing Numbers in Memory

43-744.fm Page 13 Friday, August 13, 1999 2:10 PM

USING PRIVACY

If you want to speak with someone in the room without the person on the phone hearing your conversation, press and hold PRIVACY. Release PRIVACY to resume your phone conversation.

MEMORY DIALING

You can store emergency phone num- bers or the phone numbers you most frequently call in the three priority mem- ory locations for one-touch dialing. You can store 10 more phone numbers in the indirect memory locations, then quickly call the number by entering its memory location number. Each memo- ry location can store up to 16 pulse dig- its or 15 tone digits.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse service, you can still use these special tone services by following these steps.

1.Set PULSE/TONE to PULSE.

2.Call the service.

3.When the service answers, set

PULSE/TONE to TONE.

4.Follow the normal procedure for the service you are using. Any additional numbers dialed are sent as tone signals.

5.When you complete the call, set

PULSE/TONE back to PULSE and hang up.

Storing Numbers in Memory

1.Pick up the handset.

2.Press STORE. You can still hear a dial tone from the handset.

3.Enter the phone number you want to store.

Notes:

•The phone does not actually dial the number.

•If you make a mistake, press and hold down the switchhook for a few seconds. Then release the switchhook and begin again from Step 2.

13