Radio Shack TAD-1004 owner manual Using Reset, Wall Mounting, On a Wall Plate

Page 7

43-744.fm Page 7 Friday, August 13, 1999 2:10 PM

Follow these steps to install the battery. Note: The outgoing message and all in- formation stored in memory are erased when you press RESET.

1.Use a flat-bladed screwdriver to push the latch on the battery com- partment cover, then lift the cover.

2.Snap the battery’s terminals to the connector inside the compartment.

3.Replace the cover and press down on the latch to close it securely.

When the battery is low and needs re- placing, Lo and 00 alternately flash on the display. Be sure the AC adapter’s cord is plugged in while you replace the battery, so you do not lose the TAD’s stored information.

USING RESET

If the TAD does not work, press RESET on the back of the TAD to reset the an- swering machine.

WALL MOUNTING

You can mount the TAD on a standard wall plate or directly on the wall, using two screws with heads that fit into the keyhole slots on the back of your TAD.

On a Wall Plate

1.Plug one end of the supplied short modular cord into the jack on the back of the TAD.

2.Plug the other end of the modular cord into the wall plate jack.

3.Snap the supplied mounting bracket into the slots on the bottom of the TAD.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TAD-1004 Features Literature accompanying this system FCC Statement Read this Before InstallationContents Choosing a Location InstallationConnecting to Power Installing Backup BatteryWall Mounting Using ResetOn a Wall Plate Directly on a Wall Connecting Handset Cord Preparation Setting the DAY and TimeFm Page 11 Friday, August 13, 1999 210 PM Telephone Operation Setting the RINGER’S VolumeUsing Flash Using RedialMemory Dialing Using PrivacyStoring Numbers in Memory Using the Phone Number Index Card Testing Stored Emergency NumbersDialing a Stored Number Storing/Chain-Dialing Special Service Numbers Answering System Operation Setting the TAD to Answer CallsRecording Incoming Messages Playing MessagesScreening Calls Skipping Messages Pausing Message PlaybackRepeating Messages Recording a Memo Erasing MessagesStopping Message Playback Changing the Remote Operation Security Code Remote OperationRemote ANSWER-ON Using Remote CommandsPress Command Function Fm Page 23 Friday, August 13, 1999 210 PM Incoming message is incom- plete TroubleshootingCare and Maintenance Lightning FCC Wants YOU to KnowFm Page 27 Friday, August 13, 1999 210 PM Radio Shack
Top Page Image Contents