5.Plug one end of the supplied long modular cord into the TEL LINE jack on top of the phone’s base.
6.Plug the cord’s other end into a modular phone line jack.
7.Slide the handset clip up and out of its retaining slot in the base. Rotate the clip so the tab points up, then slide the clip back into its slot. Hang the handset on the base.
CONNECTING THE
HANDSET CORD
If you place the TAD on a desk or table, or after you mount the TAD (see “Wall Mounting”), plug one end of the coiled cord into the jack on the left side of the phone’s base. Plug the other end into the jack on the handset.
9