Radio Shack TAD-1004 owner manual Dialing a Stored Number, Testing Stored Emergency Numbers

43-744.fm Page 14 Friday, August 13, 1999 2:10 PM

•You can store a FLASH entry in memory if it is the first entry.

4.Select the memory location as fol- lows:

•For a priority memory location, press P1, P2, or P3.

•For an indirect memory location, press MEMORY, then enter a two- digit memory location number (01-10).

5.Press STORE again.

6.Follow Steps 2-5 to store more phone numbers.

7.Return the handset to the cradle.

Dialing a Stored Number

To dial numbers stored in memory, lift the handset and do one of the following:

•For priority memory numbers, press P1, P2, or P3 for the number you want to call.

•For indirect memory numbers, press MEMORY. Then press the two-digit memory location number for the number you want to call.

14

Testing Stored Emergency Numbers

If you choose to place test calls for stored emergency numbers, follow these guidelines:

•Remain on the line and briefly explain to the operator the reason for the call before you hang up.

•Make these calls in off-peak hours, such as early morning or late evening.

Using the Phone Number Index Card

Use the phone number index card on the lower left of the base to record im- portant phone numbers. We suggest you use a pencil in case you change one of the numbers.