Radio Shack 43-5862 Basics Installing a Belt Clip, Using a Headset, To Attach the Belt Clip

Page 21

The Basics

Installing a Belt Clip

To Attach the Belt Clip

Insert the belt clip into the holes on each side of the handset. Press down until it clicks.

To Remove the Belt Clip

Pull either side of the belt clip to release the tabs from the holes.

Using a Headset

You can make or answer calls handsfree using an optional headset that has a 3/32-inch (2.5-mm) plug. Your local RadioShack store has a variety of headsets available.

1.To connect the headset, gently flip open the rubber headset jack cover on the

side of the handset. Then insert the headset’s plug into the jack.

2.Use or on the handset to adjust the headset’s volume.

3. With a headset connected, you can make or answer calls as usual using the keys on the handset.

4.When you finish using the headset, disconnect it from the handset and close the rubber cover to protect the jack.

 

• Always place the handset properly on the base

NOTES

whenever you are recharging the handset.

You can use a handset holder (available from your local RadioShack store) to hang the handset on your belt for added convenience when using a headset.

21

Image 21
Contents 43-5862 Contents Adjusting the Ringer, Earpiece Speaker Volume Redialing a Number Setting Up the Answering Machine Basics FeaturesIntroduction FCC Statement Important InformationRisk of Electric Shock do not Open Basics Surge Protection Important Safety InstructionsImportant Caller ID Information Read This Before InstallationHandset Controls & Functions12. */TONE key Speaker key REDIAL/PAUSE key INTCM/HOLD key intercom/holdBase Flash key and indicator speaker/flashBACK/HOLD/INTERCOM key MENU/SELECT keySelecting a Location InstallationConnecting the Phone Base Usoc number of the jack to be installed isRJ11C or RJ11W for a wall plate jack On a Wall Plate or Wall Basics Basics Connecting/Charging the Battery Pack Basics Backup battery pack is not installed Appears in the base display as a warning thatBase unit Using a Headset Basics Installing a Belt ClipTo Attach the Belt Clip To Remove the Belt ClipUsing the Interface Reading the Handset DisplayIcon Status Description Basics Reading the Base Display Basics Standby Screen Standby Basics Soft Key FunctionDuring a call HandsetBaseUsing the Handset Menus Using the Four-Way Function KeyBasics Using the Base Menus Basics Entering Text from Your Phone Changing the Dial Mode Basic SetupFrom the Handset From the BaseBasics Selecting a Language for the Display Setting the Date and TimeFor the Handset Display For the Base DisplayActivating Caller ID on Call Waiting and Call Waiting Deluxe For the Handset Keypad Activating the Key Touch ToneFor the Base Keypad Adjusting the LCD contrastAdjusting the Ringer Volume Adjusting the Ringer, Earpiece and Speaker VolumeAdjusting the Earpiece Volume Adjusting the Speaker VolumeCoil Handset Only Using the T-coil feature may shorten your battery’sRegistering Accessory Handsets Adding Optional Accessory HandsetsBeyond the Basics Ten Multi-Handset ExpandabilityBeyond the Basics Resetting Handsets Setting Up the PhonebookHandset BaseUsing the Phonebook Base Press MENU/SELECT or the Select soft keyHandset Press Base Press END/PAGE Beyond the Basics Creating Phonebook Entries Enter the name for this entry Edit NameEnter the number for this entry Edit Number Beyond the Basics Finding and Viewing a Phonebook Entry When the shared memory on the handset is fullAssign this entry to a Speed Dial number Speed Dial Oldest Caller ID message is overwrittenEditing Phonebook Entries Storing Caller ID or Redial Numbers in the PhonebookTo open the Caller ID list Deleting Phonebook Entries Deleting Individual Phonebook EntryIf the Caller ID message was received as a private Deleting All Phonebook Entries Copying Phonebook Entries to Another StationCopying Individual Phonebook Entry Copying All Phonebook EntriesCustomizing Your Phone Naming Phonebook Groups Base OnlyChanging the Handset Banner Melodies Selecting a Ring ToneFor the Handset Activating Personal RingFor the Base RingersActivating Any Key Answer Handset Only Activating Auto Talk Handset OnlyMaking a Call Using Your PhoneFrom Handset Speaker PhoneBeyond the Basics Answering a Call Hanging UpMaking a Call from the Phonebook Making a Call with Speed Dial Testing Stored Emergency NumbersTalking Caller ID Base Only Using Caller ID and Call WaitingUsing the Caller ID List Making a Call from a Caller ID Record Deleting Caller ID RecordsDeleting Individual Caller ID Record Deleting All Caller ID Records Using Call WaitingBase Press MENU/SELECT or the Options soft key Beyond the Basics Using Call Waiting DeluxeRedialing a Number Using the Redial ListMaking a Call from a Redial Record Handset Press /FLASH or SpeakerDeleting a Redial Record Finding a Lost HandsetDeleting All Redial Records Base Only If the number exceeds 32 digits, only the firstUsing Hold, Conference and Transfer Placing a Call on HoldConferencing Transferring a Call Answering a Transferred CallHandset Press INTCM/HOLD Base Press BACK/HOLD/INTERCOM Do Not Disturb All Calls Using Special FeaturesMuting the Ringer One Call Only Base Press /FLASH or BACK/HOLD/INTERCOMBeyond the Basics Muting the Microphone Privacy ModeExiting a DirectLinkTM Communication Making a DirectLink CallMaking an Intercom Beyond the Basics IntercomRoom/Baby Monitor Answering an IntercomBase Press MENU/SELECT To Protect the Station from Monitoring Request Tone Dialing Switch OverSeven-Digit Dialing Traveling Out of Range Beyond the Basics Inuse Line Setup from the BaseFeatures Setting Up the Answering MachineUsing the Answering Machine Interface Using Setup MenusFrom the Handset Handset OperationRecording a Personal Greeting Beyond the Basics Selecting a Language for AnnouncementsSelecting a Greeting Deleting Your Personal Greeting Base Only Setting the Record Time or Announce Only Beyond the Basics Setting the Number of RingsActivating the Message Alert Activating Call Screening Using the Answering Machine Turning Your Answering Machine On and OffTurning On Turning Off Reviewing MessagesPlaying From the base From the handsetYour MessagesScreening Calls Beyond the Basics Recording a Conversation Starting a recordingStopping a recording Recording a Voice Memo Starting a memoStopping a memo Message Alert Operating the Answering Machine While You Are Away from Home Command Function Symptom Suggestion TroubleshootingCharge the battery in the handset See Setting the Date and Time on Incoming messages may be too Care Service and Repair Appendix Handset-Base RegistrationBeyond the Basics Glossary Index Beyond the Basics Memo RadioShack Corporation