Beyond the Basics
2.To hang up,
HANDSET: Press or return the handset to the cradle.
BASE: Press END/PAGE.
The other party will still be connected to the call.
Transferring a Call
You can transfer a call from one station to another.
1.During a call,
HANDSET: Press INTCM/HOLD.
BASE: Press BACK/HOLD/INTERCOM.
2.Use or to select the station you want to transfer the call to. Then:
HANDSET: Press the OK soft key.
BASE: Press MENU/SELECT or the SELECT soft key.
The call will automatically be placed on hold, and a paging tone sounds. If you select ALL, all other registered handsets and base will be paged.
To cancel the transfer, press following key on the initiating station:
HANDSET: Press /FLASH or SPEAKER.
BASE: Press /FLASH.
3.When another station accepts the transferred call, your call will be disconnected.
If you want to rejoin the call, press following key again: HANDSET: Press /FLASH or SPEAKER.
BASE: Press /FLASH.
Answering a Transferred Call
When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging.
1.To accept the call transfer:
HANDSET: Press /FLASH, INTCM/HOLD, or the ANSWER soft key. If Auto Talk is on, the handset will answer when you pick up the handset from the cradle. If Any Key Answer is on, you can also press a number key, */TONE, or #.
60