Radio Shack 43-5862 owner manual Beyond the Basics

Page 91

Beyond the Basics

2.Move the cursor to select BASE UNAVAILABLE and then press the OK soft key.

3.Move the cursor to select YES, and then press the OK soft key.

4.ARE YOU SURE? appears on the display. Move the cursor to select YES, and then press the OK soft key.

5.You will hear a confirmation tone, and the handset deletes its own base information without contacting the base. The handset displays the message, MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL.

6.On the base you want to use, disconnect the AC adapter.

7.While holding END/PAGE, connect the AC adapter. Keep pressing END/PAGE until the CHARGE indicator starts to blink.

8.Place the handset on the base and wait until the CHARGE indicator stops flashing.

This erases all the handset registration data on the base, not limited to the handset you placed at Step 8 above. You need to register other handset(s) also if you have more than one. First de-register the handset as in Step 1 and 2 above, and then place it on the base.

If you have trouble with de-registration, take your base and handset (including accessory handset(s) if you have) to your local RadioShack store or call 1-800-The Shack (843-7422) for assistance.

Also, when you request repair or service, please be sure to bring in the entire system (including accessory handset if used) so we can keep your registration data intact.

91

Image 91

Contents 43-5862 Contents Adjusting the Ringer, Earpiece Speaker Volume Redialing a Number Setting Up the Answering Machine Basics FeaturesIntroduction FCC Statement Important InformationRisk of Electric Shock do not Open Basics Surge Protection Important Safety InstructionsImportant Caller ID Information Read This Before InstallationREDIAL/PAUSE key INTCM/HOLD key intercom/hold Controls & FunctionsHandset 12. */TONE key Speaker keyMENU/SELECT key Flash key and indicator speaker/flashBase BACK/HOLD/INTERCOM keySelecting a Location InstallationUsoc number of the jack to be installed is Connecting the Phone BaseRJ11C or RJ11W for a wall plate jack On a Wall Plate or Wall Basics Basics Connecting/Charging the Battery Pack Basics Appears in the base display as a warning that Backup battery pack is not installedBase unit To Remove the Belt Clip Basics Installing a Belt ClipUsing a Headset To Attach the Belt ClipReading the Handset Display Using the InterfaceIcon Status Description Basics Reading the Base Display Basics Standby Screen HandsetBase Basics Soft Key FunctionStandby During a callUsing the Handset Menus Using the Four-Way Function KeyBasics Using the Base Menus Basics Entering Text from Your Phone From the Base Basic SetupChanging the Dial Mode From the HandsetFor the Base Display Setting the Date and TimeBasics Selecting a Language for the Display For the Handset DisplayActivating Caller ID on Call Waiting and Call Waiting Deluxe For the Handset Keypad Activating the Key Touch ToneFor the Base Keypad Adjusting the LCD contrastAdjusting the Speaker Volume Adjusting the Ringer, Earpiece and Speaker VolumeAdjusting the Ringer Volume Adjusting the Earpiece VolumeCoil Handset Only Using the T-coil feature may shorten your battery’sTen Multi-Handset Expandability Adding Optional Accessory HandsetsRegistering Accessory Handsets Beyond the BasicsBase Setting Up the PhonebookBeyond the Basics Resetting Handsets HandsetBase Press MENU/SELECT or the Select soft key Using the PhonebookHandset Press Base Press END/PAGE Enter the name for this entry Edit Name Beyond the Basics Creating Phonebook EntriesEnter the number for this entry Edit Number Beyond the Basics Oldest Caller ID message is overwritten When the shared memory on the handset is fullFinding and Viewing a Phonebook Entry Assign this entry to a Speed Dial number Speed DialStoring Caller ID or Redial Numbers in the Phonebook Editing Phonebook EntriesTo open the Caller ID list Deleting Individual Phonebook Entry Deleting Phonebook EntriesIf the Caller ID message was received as a private Copying All Phonebook Entries Copying Phonebook Entries to Another StationDeleting All Phonebook Entries Copying Individual Phonebook EntryNaming Phonebook Groups Base Only Customizing Your PhoneChanging the Handset Banner Melodies Selecting a Ring ToneRingers Activating Personal RingFor the Handset For the BaseActivating Any Key Answer Handset Only Activating Auto Talk Handset OnlyHandset Speaker Phone Using Your PhoneMaking a Call FromHanging Up Beyond the Basics Answering a CallMaking a Call from the Phonebook Making a Call with Speed Dial Testing Stored Emergency NumbersTalking Caller ID Base Only Using Caller ID and Call WaitingUsing the Caller ID List Deleting Caller ID Records Making a Call from a Caller ID RecordDeleting Individual Caller ID Record Deleting All Caller ID Records Using Call WaitingBase Press MENU/SELECT or the Options soft key Beyond the Basics Using Call Waiting DeluxeHandset Press /FLASH or Speaker Using the Redial ListRedialing a Number Making a Call from a Redial RecordIf the number exceeds 32 digits, only the first Finding a Lost HandsetDeleting a Redial Record Deleting All Redial Records Base OnlyPlacing a Call on Hold Using Hold, Conference and TransferConferencing Answering a Transferred Call Transferring a CallHandset Press INTCM/HOLD Base Press BACK/HOLD/INTERCOM Base Press /FLASH or BACK/HOLD/INTERCOM Using Special FeaturesDo Not Disturb All Calls Muting the Ringer One Call OnlyBeyond the Basics Muting the Microphone Privacy ModeExiting a DirectLinkTM Communication Making a DirectLink CallMaking an Intercom Beyond the Basics IntercomAnswering an Intercom Room/Baby MonitorBase Press MENU/SELECT To Protect the Station from Monitoring Request Tone Dialing Switch OverSeven-Digit Dialing Traveling Out of Range Beyond the Basics Inuse Line Setup from the BaseUsing Setup Menus Setting Up the Answering MachineFeatures Using the Answering Machine InterfaceFrom the Handset Handset OperationRecording a Personal Greeting Beyond the Basics Selecting a Language for AnnouncementsSelecting a Greeting Deleting Your Personal Greeting Base Only Setting the Record Time or Announce Only Beyond the Basics Setting the Number of RingsActivating the Message Alert Activating Call Screening Turning Your Answering Machine On and Off Using the Answering MachineTurning On Turning Off Reviewing MessagesMessages From the base From the handsetPlaying YourScreening Calls Starting a recording Beyond the Basics Recording a ConversationStopping a recording Starting a memo Recording a Voice MemoStopping a memo Message Alert Operating the Answering Machine While You Are Away from Home Command Function Symptom Suggestion TroubleshootingCharge the battery in the handset See Setting the Date and Time on Incoming messages may be too Care Service and Repair Appendix Handset-Base RegistrationBeyond the Basics Glossary Index Beyond the Basics Memo RadioShack Corporation