TELEPHONE OPERATION
MAKING AND RECEIVING CALLS
To make a call, lift the handset and press TALK. When you hear the dial tone, dial the number.
To answer a call, just lift the handset when the handset is on the base or press any key on the handset when it is off the base.
Both the IN USE/CHARGE indicator on the base and the TALK/LOW BATT indi- cator on the handset flash when you re- ceive a call.
ADJUSTING THE
HANDSET VOLUME
The handset's VOLUME control lets you set the volume you hear through the handset to one of four levels.
To turn the volume up or down during a
call, repeatedly press VOLUME 
or
on the handset. The 
or 
. When you reach the highest or lowest volume level, the
To end a call, place the handset on the base or press TALK so the TALK/LOW BATT indicator on the handset turns off.
USING REDIAL
You can quickly dial the last number di- aled. Lift the handset and press TALK, then press REDIAL.
OUT OF RANGE SIGNAL
If you move the handset out of the base's range while a call is in progress, three beeps sound through the earpiece every four seconds. Return to within the base's range within 40 seconds, then the out of range signal stops, and you can resume your phone conversation.
If you keep the handset out of the base's range for 40 seconds or more, the call is disconnected.
Notes:
•The redial memory holds up to 32 digits, so you can redial long dis- tance as well as local numbers.
•The redial memory also holds pause entries. See “Entering a Pause” on Page 19.
16