Note: It is illegal in some areas to record a conversation without the consent of all parties to the conversation, including the phone company. Check the laws in your area before you use the
Using the Handset
Press REMOTE then MEMO REC/3. The TAD begins recording.
MEMO REC/3
To send the contents of the recording back to the caller through the telephone line, press PLAY/RPT/8 while recording.
PLAY/
RPT/8
To stop recording, press MEMO REC/3.
Using the Base
Hold down MEMO REC on the base for about 2 seconds. The recording starts.
To send the recorded contents you just made back to the caller through the tele- phone line, press PLAY/REPEAT/ 
.
To stop recording, press MEMO REC.
26
Notes:
•To stop the playback, press REMOTE on the handset, or press STOP on the base.
•To repeat the playback, press PLAY/ RPT/8 on the handset, or press
PLAY/REPEAT/ 
on the base.
PLAYING MESSAGES
After a new message is recorded, A and the number of all recorded messages flash on the display alternately.
Notes:
•The maximum number of messages that the display can show is 59. The number does not change after that even if you have received more messages.
•When the TAD receives 59 mes- sages (including your own outgoing message), or the memory has less than 15 seconds left, F (full) and the number of messages flash on the display.
Press PLAY/REPEAT/ 
on the base, or press REMOTE then PLAY/RPT/8 on the handset. The TAD announces the num- ber of messages and whether the mes- sages are new or old (already listened to). Then each new message plays, fol- lowed by the day and time it was record- ed.
When you have both old and new mes- sages, the TAD first plays back only the new messages.