Radio Shack TAD-1015 owner manual Using Flash, Paging

Page 16

43-774.fm Page 16 Friday, August 13, 1999 3:14 PM

USING FLASH

FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse service, you can still use these special tone services by follow- ing these steps.

1.Be sure P∙ ∙T is set to P (pulse).

2.Lift the handset from the base or press TALK.

3.Dial the service’s main number.

16

4.When the service answers, press TONE/ . Any additional numbers you dial are sent as tone signals.

5.After you complete the call, return the handset to the base or press TALK. The phone automatically resets to the pulse mode.

PAGING

To send a page from the base to the handset, when the phone is not in use, press PAGE on the base. The handset beeps five times. If you hold down PAGE for more that 2 seconds, the handset beeps until you release it.

Note: Paging does not work while the phone is in use.

Image 16
Contents TAD-1015 Telephone Features FeaturesTAD Features Announcement Only lets you play Read this Before Installation FCC StatementContents Using the Toll-Saver Accessing the TAD by Remote Installation Selecting aLocation Placing the BaseMounting the Base on a Wall Plate Upper Grooves Lower Mounting the Base Directly on the Wall Removing the Protective Sheet Connecting and Charging the Battery Pack PreparationSetting the Dialing Mode Turning the BASE’S Ringer OFF/ON Using Redial Telephone OperationMaking Receiving Calls Changing ChannelUsing Flash PagingMemory Dialing Storing a Number in MemoryChain-Dialing Service Numbers Testing Stored Emergency NumbersEntering a Pause Dialing a Stored NumberSetting the Number of Rings TAD OperationSetting the DAY and Time Setting the Remote Operation PINSelecting AN Outgoing Message Recording an Outgoing MessageSetting the TAD to Answer Calls Recording a Memo Screening CallsPlaying Messages Fm Page 24 Friday, August 13, 1999 314 PM Adjusting the TAD’S Volume Deleting MessagesAccessing the TAD by Remote Using the TOLL-SAVERRemote Operation Fm Page 27 Friday, August 13, 1999 314 PM Troubleshooting Problem SuggestionFm Page 29 Friday, August 13, 1999 314 PM Care and Maintenance Replacing Battery Pack FCC Wants YOU to Know Lightning Fm Page 34 Friday, August 13, 1999 314 PM Fm Page 35 Friday, August 13, 1999 314 PM RadioShack