Radio Shack TAD-1015 owner manual Setting the DAY and Time, Setting the Remote Operation PIN

43-774.fm Page 20 Friday, August 13, 1999 3:14 PM

SETTING THE REMOTE OPERATION PIN

The PIN (personal identification num- ber) permits remote access to the TAD. The PIN can be any number from 00 to 99.

Note: The default setting is 00.

1.Press REMOTE on the handset so the BATT LOW indicator lights green.

2.Press PIN/ on the keypad, then enter your two-digit PIN.

3.Press PIN/ on the keypad again. A beep sounds and your PIN is stored.

Note: If you make an error, the TAD beeps 5 times. Repeat the steps to enter the number correctly.

20

SETTING THE DAY AND TIME

You must set the day and time so the TAD can record the correct day and time of each message.

1.Press REMOTE on the handset so the BATT LOW indicator lights green.

2.Press TIME SET/9 on the keypad. Then enter the day of the week using the number keys.

To Enter:	Press:
Sunday	1
Monday	2
Tuesday	3
Wednesday	4
Thursday	5
Friday	6
Saturday	7

3.Using the number keys, enter the hour. Precede a single-digit hour with a zero.

4.Using the number keys, enter the minutes. Precede a single-digit minute with a zero.