Replace a Handset
If you want to replace a handset or
To make
To
1.Press and hold FIND HANDSET on the telephone base for about 10 seconds (until the IN USE light on the telephone base turns on and starts to flash), then release FIND HANDSET.
2.Press and release FIND HANDSET again. You must press FIND HANDSET while the IN USE light is still flashing. The IN USE light flashes for approximately seven seconds.
3.All system handsets show CONNECTING... The
If
To reset:
1.Pick up the registered handset and then press /FLASH.
2.Press OFF/CLEAR and place the handset back in the telephone base.
1.Unplug the power from the telephone base, then plug it back in.
nNote: You cannot
use.
Additional Info
43