Radio Shack 43-327 manual Additional Info

Page 50

Additional Info

The messages on the answering system are incomplete.

•If a caller leaves a very long message, part of it might be lost when the answering system disconnects the call after four minutes.

•If the memory on the answering system becomes full during a message, the answering system stops recording and disconnects the call.

•If the caller’s voice is very soft, the answering system might stop recording and disconnect the call.

The answering system does not respond to remote commands.

•Make sure your remote code is correct (page 15).

•Make sure you are calling from a touch-tone telephone. When dialing a number, there should be tones. If there are clicks, then it is not a touch- tone telephone and cannot activate the answering system.

•The answering system might not detect the remote access code when your announcement is playing. Wait until the announcement is over before entering the code.

•There might be interference on the telephone line you are using. Press the dial pad keys firmly when dialing.

An shows on the display or the VOICEMAIL light is flashing and I don’t know why.

•Your telephone has voicemail indication that is separate from the built-in answering system. If appears on the display or the VOICEMAIL light flashes, then your telephone has received a signal from your telephone service provider that you have a voicemail message waiting for you to retrieve from your telephone service provider. Contact your telephone service provider for more information on how to access your voicemail.

I cannot retrieve voicemail messages.

•Your telephone has both a built-in answering system and voicemail indication. They are independent features and each alerts you to new messages differently (page 57). If you subscribe to voicemail service from your telephone service provider (charges may apply), contact your telephone service provider for more information on how to access your voicemail.

The answering system does not answer after the correct number of rings.

•Make sure the answering system is on. When the answering system is on, ANS ON should show on the handset and telephone base.

50

Image 50

Contents Cordless Phone Contents Contents Package Contents FeaturesTelephone Setup Telephone Base and Charger InstallationBattery Installation and Charging Little charge When not in useRecycle Rechargeable Batteries Charged, place itInstallation Options Wall Mount InstallationTelephone Base Layout DeleteHandset Layout FlashMENU/SELECT Press  or  to adjust the volume. a sample Handset Ringer VolumeTelephone Base Ringer Volume Ringer ToneClear Voicemail LCD LanguageSet Date and Time Press the number keys 0-9 to enter a two-digitPress and hold MUTE/REMOVE to delete Home Area CodePress MUTE/REMOVE to delete a digit Entire entry Press MENU/SELECT to confirmNumber of Rings Answering System SetupUse a handset to change your answering system settings Remote CodePlay Your Announcement AnnouncementRecord Your Own Announcement Press 2 to playDelete Your Announcement Press 3 to delete your own recorded announcementTelephone Operation Find Handset MuteCall Waiting Chain DialingIf you have a two-handset system, your handset Multiple Handset UseIntercom Calling Handset X. The other handset rings Share an Outside CallOther handset rings and its screen shows Other Its screen shows Handset X is CallingFrom this intercom call, you have the following options Directory Store a Directory EntryCharacter Chart Enter NameDial a Directory Entry Search the DirectoryAlphabetical Search Screen shows Edit Name Edit a Directory EntryDelete from the Directory About the Call Log Call LogAbout Caller ID Missed Calls Indicator Review the Call LogDifferent dialing options for local and long distance Make a Call Log Entry Ready to DialDial a Call Log Entry Numbers before dialing or saving the telephone numberDelete from the Call Log Call Log Display Screen MessagesDelete from Redial Redial ListDial a Redial Entry Turn the Answering System On or Off Answering System OperationAbout the Answering System and Voicemail Message CapacityNew Message Indication Call ScreeningCall Intercept Message PlaybackDelete All Messages To delete all messages with the telephone baseRecording a Memo Record and Play MemosMessage Window Displays Window Descriptions Displays Flashing Remote AccessTelephone base speaker volume level while adjusting Function End the callAdditional Information Handset Display Screen MessagesOr directory and another handset attempts To review it There is no telephone line connectedOne handset is already viewing the call log Connected to the external call during call TransferTelephone Base Lights Handset and Telephone Base IndicatorsHandset Lights Handset IconsBattery Expanding your Telephone System Add and Register a Handset OptionalReplace a Handset Troubleshooting Additional Info Additional Info Additional Info Additional Info Additional Info Additional Info Additional Info Important Safety Instructions Operating Range Maintenance About Cordless TelephonesSpecifications FCC Information Limited Warranty Page