Radio Shack 43-327 manual Additional Info

Page 45

If the handset is in the telephone base or charger but the CHARGE light on the handset is not on, refer to The charge light is off in this section.

If the battery is completely depleted, it can take up to 10 minutes to charge the handset before PLACE IN CHARGER or LOW BATTERY appears on the screen (page 6).

Purchase a new battery from your local RadioShack store or www. RadioShack.com.

The CHARGE light is off.

Clean the charging contacts on the handset and telephone base each month with a pencil eraser or a dry non-abrasive fabric.

Make sure the power adapter and telephone line cord are plugged in correctly and securely.

Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to one minute for the handset and telephone base to reset.

There is no dial tone.

First, try the suggestions listed under previous suggestions.

Move the handset closer to the telephone base. It might be out of range.

The telephone line cord might be malfunctioning. Install a new telephone line cord.

Disconnect the telephone base from the telephone wall jack and connect a different telephone. If there is no dial tone on this telephone either, the problem is in your wiring or local service. Contact your local telephone company.

The telephone does not ring when there is an incoming call.

Make sure the handset ringer volume is not set to the lowest level and the telephone base ringer volume is not set to zero (page 12).

Make sure the telephone line cord and power adapter are plugged in properly (page 5).

The handset might be too far from the telephone base. Move it closer to the telephone base.

There might be too many extension phones on the telephone line to allow all of them to ring simultaneously. Unplug some of them.

If the other telephones in your home are having the same problem, the problem is in the wiring or local service. Contact the local telephone company (charges might apply).

Other electronic products can cause interference to your cordless telephone. Install your telephone as far away as possible from electronic

Additional Info

45

Image 45
Contents Cordless Phone Contents Contents Features Package ContentsTelephone Base and Charger Installation Telephone SetupBattery Installation and Charging Recycle Rechargeable Batteries When not in useLittle charge Charged, place itWall Mount Installation Installation OptionsDelete Telephone Base LayoutFlash Handset LayoutMENU/SELECT Telephone Base Ringer Volume Handset Ringer VolumePress  or  to adjust the volume. a sample Ringer ToneSet Date and Time LCD LanguageClear Voicemail Press the number keys 0-9 to enter a two-digitPress MUTE/REMOVE to delete a digit Home Area CodePress and hold MUTE/REMOVE to delete Entire entry Press MENU/SELECT to confirmUse a handset to change your answering system settings Answering System SetupNumber of Rings Remote CodeRecord Your Own Announcement AnnouncementPlay Your Announcement Press 2 to playPress 3 to delete your own recorded announcement Delete Your AnnouncementTelephone Operation Call Waiting MuteFind Handset Chain DialingMultiple Handset Use IntercomIf you have a two-handset system, your handset Other handset rings and its screen shows Other Share an Outside CallCalling Handset X. The other handset rings Its screen shows Handset X is CallingFrom this intercom call, you have the following options Store a Directory Entry DirectoryEnter Name Character ChartSearch the Directory Alphabetical SearchDial a Directory Entry Edit a Directory Entry Delete from the DirectoryScreen shows Edit Name Call Log About Caller IDAbout the Call Log Review the Call Log Missed Calls IndicatorDial a Call Log Entry Make a Call Log Entry Ready to DialDifferent dialing options for local and long distance Numbers before dialing or saving the telephone numberCall Log Display Screen Messages Delete from the Call LogRedial List Dial a Redial EntryDelete from Redial About the Answering System and Voicemail Answering System OperationTurn the Answering System On or Off Message CapacityCall Intercept Call ScreeningNew Message Indication Message PlaybackTo delete all messages with the telephone base Delete All MessagesRecord and Play Memos Message Window DisplaysRecording a Memo Remote Access Telephone base speaker volume level while adjustingWindow Descriptions Displays Flashing End the call FunctionHandset Display Screen Messages Additional InformationOne handset is already viewing the call log There is no telephone line connectedOr directory and another handset attempts To review it Connected to the external call during call TransferHandset Lights Handset and Telephone Base IndicatorsTelephone Base Lights Handset IconsBattery Add and Register a Handset Optional Expanding your Telephone SystemReplace a Handset Troubleshooting Additional Info Additional Info Additional Info Additional Info Additional Info Additional Info Additional Info Important Safety Instructions Operating Range About Cordless Telephones MaintenanceSpecifications FCC Information Limited Warranty Page