Radio Shack 43-327 manual Troubleshooting

Page 44

Additional Info

Troubleshooting

If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit your local RadioShack store or www.RadioShack.com.

My telephone does not work at all.

•Make sure the battery is installed and charged correctly (see page 6). For optimum daily performance, return the handset to the telephone base or charger after each use.

•Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch.

•Make sure the telephone line cord is plugged firmly into the telephone base and the telephone wall jack.

•Unplug the electrical power to the telephone base. Wait for approximately 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to synchronize.

•Charge the battery in the handset for up to 16 hours.

•If the battery is completely depleted, it can take up to 10 minutes to charge the handset before PLACE IN CHARGER or LOW BATTERY appears on the screen (page 6).

•Remove and re-insert the battery. If that still does not work, it might be necessary to purchase a new battery.

•Disconnect the telephone base from the telephone wall jack and plug in a working telephone. If the other telephone does not work, the problem is probably in the wiring or the local service. Call the local telephone company.

Low Battery shows on screen.

•Place the handset in the telephone base or charger for recharging.

•Remove and re-install the battery and use it until fully depleted, then recharge the handset in the telephone base or charger for up to 16 hours.

•If the above measures do not correct the problem, replace the battery.

The battery does not charge in the handset or the handset battery does not accept charge.

•Make sure the handset is placed in the telephone base or charger correctly. The CHARGE light on the handset should be on.

•Remove and reinstall the battery, then charge for up to 16 hours.

44

Image 44

Contents Cordless Phone Contents Contents Package Contents FeaturesTelephone Setup Telephone Base and Charger InstallationBattery Installation and Charging When not in use Recycle Rechargeable BatteriesLittle charge Charged, place itInstallation Options Wall Mount InstallationTelephone Base Layout DeleteHandset Layout FlashMENU/SELECT Handset Ringer Volume Telephone Base Ringer VolumePress  or  to adjust the volume. a sample Ringer ToneLCD Language Set Date and TimeClear Voicemail Press the number keys 0-9 to enter a two-digitHome Area Code Press MUTE/REMOVE to delete a digitPress and hold MUTE/REMOVE to delete Entire entry Press MENU/SELECT to confirmAnswering System Setup Use a handset to change your answering system settingsNumber of Rings Remote CodeAnnouncement Record Your Own AnnouncementPlay Your Announcement Press 2 to playDelete Your Announcement Press 3 to delete your own recorded announcementTelephone Operation Mute Call WaitingFind Handset Chain DialingIf you have a two-handset system, your handset Multiple Handset UseIntercom Share an Outside Call Other handset rings and its screen shows OtherCalling Handset X. The other handset rings Its screen shows Handset X is CallingFrom this intercom call, you have the following options Directory Store a Directory EntryCharacter Chart Enter NameDial a Directory Entry Search the DirectoryAlphabetical Search Screen shows Edit Name Edit a Directory EntryDelete from the Directory About the Call Log Call LogAbout Caller ID Missed Calls Indicator Review the Call LogMake a Call Log Entry Ready to Dial Dial a Call Log EntryDifferent dialing options for local and long distance Numbers before dialing or saving the telephone numberDelete from the Call Log Call Log Display Screen MessagesDelete from Redial Redial ListDial a Redial Entry Answering System Operation About the Answering System and VoicemailTurn the Answering System On or Off Message CapacityCall Screening Call InterceptNew Message Indication Message PlaybackDelete All Messages To delete all messages with the telephone baseRecording a Memo Record and Play MemosMessage Window Displays Window Descriptions Displays Flashing Remote AccessTelephone base speaker volume level while adjusting Function End the callAdditional Information Handset Display Screen MessagesThere is no telephone line connected One handset is already viewing the call logOr directory and another handset attempts To review it Connected to the external call during call TransferHandset and Telephone Base Indicators Handset LightsTelephone Base Lights Handset IconsBattery Expanding your Telephone System Add and Register a Handset OptionalReplace a Handset Troubleshooting Additional Info Additional Info Additional Info Additional Info Additional Info Additional Info Additional Info Important Safety Instructions Operating Range Maintenance About Cordless TelephonesSpecifications FCC Information Limited Warranty Page