Radio Shack 43-327 manual Additional Info

Page 49

for 15 seconds, then plug in the power adapter and re-install the battery. Place the handset in the telephone base and allow up to one minute for the handset and telephone base to synchronize.

•Other electronic products might prevent your handset and telephone base from communicating with each other. Install your telephone base as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless telephones.

The answering system does not answer after the correct number of rings.

•Make sure the answering system is on. When the answering system is on, the ANS ON/OFF light on the telephone base should be lit and ANS ON should show on the handset.

•If toll saver is selected, the number of rings changes to two when there are new messages waiting (page 15).

•If the memory is full or if the answering system is off, the answering system answers after 10 rings.

•In some cases, the answering system is affected by the ringing system used by the local telephone company.

The outgoing announcement is not clear.

•When recording the announcement, make sure you speak in a normal tone of voice towards the microphone of the handset.

•Make sure there is no background noise when recording.

The messages on the answering system are very difficult to hear.

•Press VOL  on the telephone base or handset to increase the speaker volume.

The answering system does not record messages.

•Make sure the answering system is on.

•When the answering machine memory is full, it does not record new messages until some old messages are deleted.

•If you subscribe to voicemail service, change the number of rings so that your answering system answers before your voicemail answers (page 57). To determine how many rings will activate your voicemail, please contact your local telephone service provider.

•If there is a fax machine connected to the same telephone line, try disconnecting the fax machine. If that solves the problem, consult your fax machine documentation for information on compatibility with answering systems.

Additional Info

49

Image 49

Contents Cordless Phone Contents Contents Features Package ContentsTelephone Base and Charger Installation Telephone SetupBattery Installation and Charging Recycle Rechargeable Batteries When not in useLittle charge Charged, place itWall Mount Installation Installation OptionsDelete Telephone Base LayoutFlash Handset LayoutMENU/SELECT Telephone Base Ringer Volume Handset Ringer VolumePress  or  to adjust the volume. a sample Ringer ToneSet Date and Time LCD LanguageClear Voicemail Press the number keys 0-9 to enter a two-digitPress MUTE/REMOVE to delete a digit Home Area CodePress and hold MUTE/REMOVE to delete Entire entry Press MENU/SELECT to confirmUse a handset to change your answering system settings Answering System SetupNumber of Rings Remote CodeRecord Your Own Announcement AnnouncementPlay Your Announcement Press 2 to playPress 3 to delete your own recorded announcement Delete Your AnnouncementTelephone Operation Call Waiting MuteFind Handset Chain DialingIntercom Multiple Handset UseIf you have a two-handset system, your handset Other handset rings and its screen shows Other Share an Outside CallCalling Handset X. The other handset rings Its screen shows Handset X is CallingFrom this intercom call, you have the following options Store a Directory Entry DirectoryEnter Name Character ChartAlphabetical Search Search the DirectoryDial a Directory Entry Delete from the Directory Edit a Directory EntryScreen shows Edit Name About Caller ID Call LogAbout the Call Log Review the Call Log Missed Calls IndicatorDial a Call Log Entry Make a Call Log Entry Ready to DialDifferent dialing options for local and long distance Numbers before dialing or saving the telephone numberCall Log Display Screen Messages Delete from the Call LogDial a Redial Entry Redial ListDelete from Redial About the Answering System and Voicemail Answering System OperationTurn the Answering System On or Off Message CapacityCall Intercept Call ScreeningNew Message Indication Message PlaybackTo delete all messages with the telephone base Delete All MessagesMessage Window Displays Record and Play MemosRecording a Memo Telephone base speaker volume level while adjusting Remote AccessWindow Descriptions Displays Flashing End the call FunctionHandset Display Screen Messages Additional InformationOne handset is already viewing the call log There is no telephone line connectedOr directory and another handset attempts To review it Connected to the external call during call TransferHandset Lights Handset and Telephone Base IndicatorsTelephone Base Lights Handset IconsBattery Add and Register a Handset Optional Expanding your Telephone SystemReplace a Handset Troubleshooting Additional Info Additional Info Additional Info Additional Info Additional Info Additional Info Additional Info Important Safety Instructions Operating Range About Cordless Telephones MaintenanceSpecifications FCC Information Limited Warranty Page