PREPARATION
Complete the procedures in this sec- tion before you set the TAD to answer calls.
Note: The keypad is located under the cover on the front of the TAD. Lift the cover to access the keys.
SETTING THE DAY
AND TIME
Follow these steps to set the current day and time so the TAD will record the day and time each memo and phone message is recorded.
1.When CL flashes on the display, press PGM/DEL. The answer indi- cator flashes.
3.Press a number button to set the day of the week. The TAD says the day of the week and “Enter the time.”
4.Press two digits for the hour. The TAD says the hour.
Note: If you make an invalid entry (for example, 00 or 13), the TAD beeps three times and repeats “Enter the time.”
5.Press two digits for the minute. The TAD says the minute and “Enter one for AM, two for PM.”
Note: If you make an invalid entry (for example, 66), the TAD beeps three times. The TAD does not repeat the audio prompt. Make a correct entry.
6.Press 1 or 2. The TAD says the current day and time.
Notes:
2.Press TIME. The TAD says “Enter one for Monday. Enter two for Tuesday. Enter three for Wednes- day. Enter four for Thursday. Enter five for Friday. Enter six for Satur- day. Enter seven for Sunday.”
•If you make an incorrect entry, the TAD beeps three times. Make a correct entry.
•If you do not press any keys to set the date and time, the TAD contin- ues through the voice prompt sequence with time delays for your responses and says “Mon- day, 2:04 AM.”
To hear the current day of the week and time at any time, press PGM/DEL, then 9.
8