Radio Shack TAD-1005 Setting the Mailbox Security Codes, Resetting a Mailbox Security Code

43-745.fm Page 9 Friday, August 13, 1999 2:16 PM

SETTING THE MAILBOX SECURITY CODES

To access each mailbox, you must en- ter a 2-digit mailbox security code. The security codes for Mailboxes 1, 2, 3, and 4 are preset to 01, 02, 03, and 04, respectively.

Follow these steps to change a mail- box security code.

1.Press PGM/DEL. The answer indi- cator flashes.

2.Press MAILBOX MODE within 30 seconds.

3.Press the mailbox number (1, 2, 3, or 4) within 30 seconds.

4.Enter the old security code for that mailbox.

Note: If you enter the wrong secu- rity code, the TAD beeps three times. Restart the procedure at Step 1.

5.Enter the new security code. The TAD beeps twice, and the answer indicator stops flashing.

Resetting a Mailbox Security Code

If you forget a mailbox security code, you can reset each mailbox’s code to its default (01, 02, 03, or 04).

Note: All messages stored in a mail- box are deleted when you reset its se- curity code.

Follow these steps to reset the mailbox security code.

1.Press PGM/DEL. The answer indi- cator flashes.

2.Press MB RESET.

3.Press the number of the mailbox you want to reset then press it again. The mailbox returns to its preset security code, which shows on the display, and the indicator stops flashing.

9