CONNECTING THE AC ADAPTER
Caution: You must use a Class II AC adapter that supplies 9 volts of power, delivers at least 300 milliamps, and has a plug that properly fits the TAD’s 9V DC jack with its center tip set to neg- ative. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the adapter and the TAD.
1.Insert the barrel plug of the sup- plied AC adapter into the 9V DC jack on the back of the TAD.
2.Plug the other end of the AC adapter into a standard AC outlet.
The TAD initializes itself and counts down from 59 to 0. The TAD then beeps and CL (clear) flashes on the display.
Note: Be sure not to press any of the TAD’s buttons while you are plugging the adapter into the AC outlet. If you accidentally press a button and do not hear the beep, reset the TAD by un- plugging the adapter from the AC out- let and reinserting it.
CONNECTING TO THE TELEPHONE LINE
1.Unplug the telephone’s modular cord from the modular phone line jack and plug it into the TO TEL jack on the back of the TAD.
2.Plug one end of the supplied mod- ular cord into the TO LINE jack on the back of the TAD.
3.Plug the cord’s other end into a modular phone line jack.
Note: If the phone line jack is not a modular jack, you must update the wir- ing. You can convert the wiring your- self, using jacks and adapters available at your local Radio Shack store. Or, you can let the phone com- pany update the wiring for you.
•The phone company will charge you for the installation of neces- sary jacks.
•The USOC number of the jack to be installed is RJ11C.
7