Recording the Memory Full Announcement
The TAD has a
Follow these steps if you want to record your own memory full an- nouncement.
Note: The maximum recording time for the memory full announcement is pre- set to 1 minute, but you can change it to 3 minutes (see “Setting the Mes- sage Length”).
1.Press and hold OGM and 1M/3M at the same time until the answer indicator flashes.
2.Speak into the TAD in a strong voice from about 12 inches away.
3.Press ON/OFF when you finish recording the announcement. The TAD plays the current memory full announcement.
Checking the Memory Full Announcement
To listen to your own memory full an- nouncement, press OGM, then press 1M/3M immediately.
If you want to stop listening to the memory full announcement before it ends, press ON/OFF. The TAD beeps three times.
12