![](/images/new-backgrounds/1251248/25124819x1.webp)
6.To change the minutes, repeatedly press REPEAT to move backward or SKIP to move forward to the desired minute setting.
Note: To rapidly change the min- utes, press and hold REPEAT or SKIP until the desired digits appear.
7.After you set the day of the week, the hour, and the minutes, press STOP to confirm the settings. The TAD beeps and announces the day and time.
To check the current day/time at any time, press SET.
RECORDING THE OUTGOING MESSAGE
“You have reached the Jones resi- dence. We are unable to come to the phone right now, but you may press: 1 to leave a message for John, 2 to leave a message for Mary, 3 to leave a mes- sage for Susan, 4 to leave a message for Helen, or you can wait until after the beep to leave a message for John. Please include your name and phone number in your message.”
Important: Do not tell callers that you are not home. Instead, say that you can- not come to the phone right now.
Follow these steps to record your outgo- ing announcement.
1.Press and hold down ANN. The TAD beeps.
Before you can set the TAD to answer calls, you must record the outgoing mes- sage (OGM) the caller hears when the TAD answers a call.
Note: The maximum outgoing message length is 30 seconds.
Since the TAD can receive and save messages for up to four different users, the outgoing announcement should ex- plain how to leave a message for a par- ticular person. For example:
10
Note: When memory is full, the TAD announces, “Memory is full,” and you cannot record the outgoing message. You must delete some messages before you can record the outgoing message (see “Delet- ing Messages”).