Radio Shack TAD-1007 owner manual Changing the Remote Operation Security Code

You can operate the TAD from almost any touch-tone phone, or from a rotary phone using a pocket tone-dialer (avail- able at your local Radio Shack store). The TAD’s remote operation security code is preset to 747. You can operate your TAD remotely with this code; how- ever, we recommend that you set your own code.

Notes:

•When the memory is full, the TAD answers the call after two rings and announces, “Memory is full.”

•To bypass the outgoing message and begin recording a message immediately when you call the TAD from a remote phone, you can press ] on touch tone phones (or a pocket tone dialer if you use a rotary phone) when the announce- ment begins. The TAD skips the rest of the announcement, beeps once, and begins recording.

CHANGING THE REMOTE OPERATION SECURITY CODE

Notes:

•You can set the security code to any number from 500 to 999.

•Be sure to set each digit within 8 seconds. Otherwise, you must start over from Step 1.

•Do not use three identical digits (such as 999) for the security code. Numbers like this are too easy for others to guess!

•If AC power fails and no battery is installed or if the backup battery becomes weak, the remote opera- tion security code automatically resets to 747.

1.Press and hold CODE for about 2 seconds. The TAD beeps, and the first digit of the preset code appears on the display.