2.While holding down ANN, speak in a normal voice about 8 inches away from the microphone (located on the front of the TAD). Ask for the caller’s name, phone number, and message. The display shows how much time is left for recording.
3.When you finish recording, release ANN. The TAD automatically beeps and repeats the outgoing message so you can verify it.
4.Adjust VOLUME at the right side of the TAD to the desired listening level.
To play the outgoing message at any time, press and release ANN. If no out- going message is recorded, the TAD says “No announcement.”
SETTING 2/4/TS
2/4/TS on the back of the TAD controls how long the TAD waits before it an- swers a call.
2 — The TAD answers after 2 rings.
4 — The TAD answers after 4 rings.
TS (Toll Saver) — If there are no new messages, the TAD answers after four rings. If there are new messages in any mailbox, the TAD answers after about two rings. This lets you avoid unneces- sary toll charges when calling by long- distance to check your messages. If you hear more than two rings, the TAD has no new messages. Hang up before the TAD answers so you will not be charged for the call.
11