![](/images/new-backgrounds/1251248/25124815x1.webp)
2.Snap the battery’s terminals to the connector inside the compartment. Then place the battery inside.
3. Replace the cover
When Lo and the number of calls in memory alternately flash on the display, replace the battery. Be sure the AC adapter’s cord is plugged in so you do not lose the TAD’s stored information.
8
USING RESET
If the TAD does not work, press RESET on the back of the TAD to reset the an- swering machine.
Note: The outgoing message and all in- formation stored in memory are deleted when you press RESET.