Radio Shack TAD-1007 owner manual Remote ANSWER-ON

2.Press SKIP or REPEAT to set the first digit, then press STOP. The TAD beeps and the second digit flashes.

3.Press SKIP or REPEAT to set the second digit, then press STOP. The TAD beeps and the third digit flashes.

4.Press SKIP or REPEAT to set the third digit, then press STOP. The TAD beeps.

To see the new code, press and release CODE.

18

REMOTE ANSWER-ON

Note: You must record an outgoing message before you can remotely set the TAD to answer calls.

Follow these steps to remotely set the TAD to answer calls.

1.Dial your phone number.

If the TAD is set to answer-off, it answers the call after 60 seconds and announces, “Answer off.”

2.Enter the remote operation security code within 8 seconds. The TAD beeps.

Note: If you do not enter each digit of the security code within 8 sec- onds, the TAD hangs up.

3.Press #. The TAD beeps and announces, “Answer on.”

4.You can hang up at this point and have the TAD answer calls, or you can enter other remote com- mand(s) (see “Using Remote Com- mands”).