Radio Shack TAD-1007 owner manual Basic Operation, Setting the TAD to Answer Calls

SETTING THE TAD TO ANSWER CALLS

To set the TAD to answer calls, press

ANSWER.

•If an outgoing message is recorded, the TAD announces, “Answer on,” and the indicator in the call/mes- sage counter window lights.

•If no outgoing message is recorded, the TAD says, “Answer off, no announcement.” (See “Recording the Outgoing Message.”)

To have the TAD not answer calls, press ANSWER again. The TAD says “Answer off,” and the indicator turns off.

RECORDING INCOMING MESSAGES

After the TAD answers a call, the outgo- ing message plays. After the TAD beeps at the end of the announcement, the caller must select a mailbox by en- tering a number (1-4). The TAD an- nounces, “Record Mailbox” and the mailbox number. If the caller does not select a mailbox, the recorded message is left in Mailbox 1.

The maximum incoming message re- cording length is 60 seconds. If a re- cording reaches 55 seconds, the TAD beeps once to notify the caller that time will be up soon. If a recording reaches 60 seconds, the TAD beeps three times, then disconnects.

The TAD automatically stops and hangs up if it detects silence for over 8 sec- onds.

If the memory is full, the TAD announc- es, “Memory is full” and displays FL, then disconnects.