RECORDING A MEMO
A memo is a message that you record by speaking directly into the TAD, with- out calling in on the phone line.
1.Press and hold MEMO until the TAD beeps. The ON LINE indica- tor flashes and the MEMO indica- tor lights steadily.
illustration
2.Release MEMO and record your message. Speak into the TAD from about 12 inches away.
3.When you finish speaking, press ON/OFF. The TAD beeps once then the ON LINE indicator lights steadily. The MEMO indicator flashes to indicate that you have a “memo” message.
To play back a memo, see “Playing Memos.”
PLAYING MESSAGES
Notes:
•During playback of any message type (incoming message, memo, or
—To repeat the current mes- sage, press 7/ 
<
—To skip back to the previous message, press 6/
—To skip forward to the next message, press 9/
•To delete any type of message, see “Deleting Messages.”
•To stop playback of any message at any time, press ON/OFF.
Playing Incoming Messages
The PLAY indicator flashes after the TAD records one or more incoming messages. To listen to an incoming message(s), press PLAY. The TAD tells you how many messages it has recorded. For example, if there are three messages, the TAD says “Three messages.”
The TAD plays each recorded mes- sage, one after the other, beginning with the most recent one. At the end of each message, the TAD announces the day and time the message was re- corded. After playing the last message, the TAD beeps once.
After you play the message(s), the PLAY indicator lights steadily and the TAD automatically saves the mes- sage(s) and resets to answer calls. To replay the incoming message(s), sim- ply press PLAY again.
15